Reviewed August 2026 against GIA Gems & Gemology (Winter 2003), USGS Mineral Commodity Summaries, and Gem Society reference data.

Try it: Run your own numbers →

Red Beryl Price Per Carat: What It’s Worth and Why

Red beryl costs $500 to $30,000 per carat depending on color, clarity and size, according to gem market research from Raza Gems LLC. Premium faceted specimens with excellent color and eye-clean clarity trade at $10,000–$20,000 per carat, per gem dealer surveys compiled by GemRock Auctions. Stones above 2 carats are rare enough that they’re priced individually through private sale or auction rather than by a standard per-carat range. There is no public spot-price index for red beryl — unlike gold or copper, every quote comes from a dealer, auction house, or private parcel, which is exactly why the range is wide and why this guide breaks it down by grade instead of giving you one number.

Nearly all of it comes from one place: the Wah Wah Mountains of Utah, which GemRock Auctions estimates supplies roughly 85% of world red beryl production. That single-source geology, more than fashion or jewelry demand, is what holds the price up.

Red Beryl Value Breakdown Table by Grade

The two sources behind this guide frame the market differently — GemRock Auctions surveys dealers on premium faceted stones, while Raza Gems reports the full range including commercial-grade rough. Reading them side by side gives you the actual spread, not a single misleading average.

What Actually Sets the Price: Color, Clarity, Carat, Provenance

“How much is red beryl worth” and “how much is a red beryl worth” both resolve to the same four levers. None of them are subjective once you know what to check.

1. Color and saturation: Vivid, even crimson to burgundy without visible color zoning sits at the top of the GemRock Auctions $10,000–$20,000/ct band. Zoned or washed-out stones fall toward Raza Gems’ lower bound.
2. Clarity: “Eye clean” stones (no inclusions visible without magnification) command the premium end of both cited ranges. Included material is priced as rough or commercial grade, not faceted-gem grade.
3. Carat weight: Gem Society reference data puts typical gem-quality red beryl under 3 carats. The Gem Library reports a mining yield of roughly 0.5 carat of red beryl per ton of ore processed — before cutting loss. GIA’s historical analysis of 1978–2003 Utah production found only about 10% of material recovered was facetable at all. Cutting a rough crystal down to a clean faceted stone over 1 carat is the rare outcome, not the norm — which is the main reason price accelerates with size rather than scaling linearly.
4. Provenance: Wah Wah Mountains origin is not a sentimental add-on. GemRock Auctions puts ~85% of world supply there, so “Utah red beryl” is close to a de facto grading category on its own, and buyers pay to have that origin documented.
5. Treatment status: Red beryl is conventionally sold untreated. There’s no brief-verified figure on a “treatment discount,” but every source treats untreated, natural material as the baseline the premium prices above assume.

Why Red Beryl Is Rare: Geology and Production Numbers

Red beryl (beryllium aluminum silicate, Be₃Al₂Si₆O₁₈) forms only where beryllium-bearing rhyolitic host rock, fracture pathways for hydrothermal fluid, and trace manganese — the element responsible for the red color — occur together. That combination is rare enough that Gem Society reports fewer than 1,000 carats of gem-grade red beryl are produced in many recent years, and fewer than 10,000 stones are cut globally by lapidaries each year — a small enough number that most jewelers never handle one in their career.

The historical record backs up how tight the supply really is. According to GIA’s Gems & Gemology (Winter 2003), Utah’s Wah Wah Mountains produced over 60,000 carats of red beryl total across the 1978–2003 period — but only about 10% of that was facetable. Red beryl was first identified as a distinct gemstone in 1904, per Gem Society’s mineralogical history, and the Wah Wah deposit remains the commercial anchor of the market well over a century later.

No government body — not USGS, not any state geological survey — publishes an annual gem-grade red beryl production figure. USGS tracks industrial beryllium and beryl ore, which is a different market entirely (more on that split below). The 1978–2003 GIA dataset is the most complete historical run publicly available; nothing published since updates it at the same level of detail. If you need current-year Utah output, the Wah Wah Mountains mine and other private operators disclose production sporadically on their own sites — there’s no regulatory filing that forces a public number.

Why There’s No Spot Price for Red Beryl

Ask “what’s the market price of red beryl” and you’ll get a range, not a number, because the infrastructure that produces a single number for gold or diamonds doesn’t exist here. There’s no futures exchange, no centralized auction clearinghouse, and — per the research gaps in this space — no audited third-party pricing benchmark comparable to GIA’s members-only diamond pricing. What exists instead:

• Dealer asking prices: GemRock Auctions and Raza Gems LLC publish listings and market commentary, refreshed on their own schedule — check both directly for a current asking-price snapshot, since neither source is tied to a fixed release calendar.
• Private and parcel sales: A meaningful share of red beryl trade happens through direct dealer networks and mineral-collector auctions that don’t publish results publicly.
• No trade-volume data: Faceted red beryl isn’t broken out as its own category in US trade statistics, so import/export volume for the gem-grade stone can’t be verified independently — this is a genuine data gap, not an oversight in this guide.
• Try it: Run your own numbers

The practical consequence: treat any single quoted price as one data point from one seller, and cross-check it against the grade bands in the table above before you decide it’s fair.

Red Beryl vs. Industrial Beryl: Two Different Markets

It matters that “red beryl” and “beryl” are not the same market, because USGS numbers on beryl are frequently misapplied to the gem trade. USGS Mineral Commodity Summaries 2026 reports US apparent beryllium consumption at 150 metric tons in 2023, valued at roughly $205 million — that’s industrial beryllium metal used in aerospace, defense and electronics, extracted from ordinary beryl ore, not gem-grade red beryl. A separate USGS summary put total US beryl production (all industrial grades) at 4,330 metric tons in 2022.

Gem-quality red beryl is a rounding error against that industrial tonnage — a handful of carats a year against thousands of metric tons of ore. The two markets share a mineral name and nothing else: one is priced per carat by color and clarity, the other per metric ton by beryllium content for industrial alloys. If you see a headline beryl statistic and it’s in metric tons rather than carats, it’s describing the industrial market, not the gemstone you’re pricing.

If your operational scope involves mining, minerals, or prospecting for strategically rare assets like red beryl, Farmonaut’s satellite based mineral detection delivers global, data-driven prospectivity mapping and risk-reducing intelligence — before you invest in on-ground exploration.

Parcel Value Estimator

Dealers price rough parcels off a facetable-yield assumption, not the raw carat weight — use the calculator below with the two published yield figures (0.5 ct recovered per ton of ore, and roughly 10% of that recovered material actually facetable) to estimate what a parcel of rough is worth before you cut it.

Mining and Exploration Implications

For mining and infrastructure operators, red beryl is a low-volume, high-value-per-unit target that behaves nothing like a bulk commodity play. A few things follow directly from the production numbers above:

• Targeting precision matters more than scale. With roughly 10% of historically mined material proving facetable, a project’s economics hinge on finding the highest-grade pockets, not on processing more tonnage.
• Extraction and cutting are inseparable. Because typical gem-quality stones run under 3 carats, preserving the crystal during extraction directly determines whether it can be cut at all.
• Site evaluation needs geospatial context before drilling. Given how concentrated production is — approximately 85% from one Utah range, per GemRock Auctions — comparing a prospective site’s alteration signature against known producing geology is more informative than treating it as a blank-slate exploration target.
• Environmental footprint is a real constraint, not a compliance checkbox. Small, fragile host-rock systems can be damaged by aggressive extraction in ways that reduce a site’s long-term viability.

Satellite-Based Red Beryl Exploration

Farmonaut applies remote sensing, AI, and hyperspectral mineral detection to rare-mineral exploration, including red beryl-bearing terrain. Given how tightly production is concentrated — and how little of what’s mined is ever facetable — reducing wasted ground disturbance on low-probability targets is where satellite screening earns its cost back fastest.

• Identify high-potential mineralized target zones over large areas before any site visit
• Analyze spectral signatures associated with beryl-bearing host rock and alteration halos
• Deliver georeferenced reports with heatmaps and geological context
• Reduce time spent on low-probability ground versus traditional blanket field surveys

See Farmonaut’s satellite driven 3D mineral prospectivity mapping for a look at the underlying output.

To get a tailored report for a Utah, US, or international site, Get a Quote. For technical questions, use Contact Us.

How to Verify a Red Beryl Price Quote

This is the durable part of this guide — the numbers above will move, but the checklist for judging any quote won’t:

1. Get the grade in writing. Color saturation, presence of zoning, clarity (eye-clean or included), and exact carat weight after cutting. A quote without these is not comparable to anything.
2. Ask for provenance documentation. Wah Wah Mountains, Utah origin should be traceable, not asserted. Given that region’s ~85% share of world production per GemRock Auctions, undocumented “Utah origin” claims are common and worth independent verification.
3. Confirm treatment status. Red beryl is conventionally sold untreated; ask explicitly whether the stone has been enhanced.
4. Cross-check against both cited ranges. Raza Gems’ $500–$30,000/ct full-market range and GemRock Auctions’ $10,000–$20,000/ct premium range should bracket a legitimate quote for the stated grade — if a quote is far outside both, ask why.
5. Check for recent dealer listings. GemRock Auctions and Raza Gems LLC are the two market-facing sources this guide draws on; both publish current listings you can check against a specific quote at the time you’re evaluating it.
6. Treat parcel pricing differently from single-stone pricing. Uniform-quality parcels sell at a premium to mixed lots; a per-carat parcel price isn’t directly comparable to a single faceted stone’s price.

Quick Reference: Where to Look for Current Figures

• Current asking prices: GemRock Auctions and Raza Gems LLC listings, checked at time of inquiry — neither publishes on a fixed schedule.
• Industrial beryllium market context: USGS Mineral Commodity Summaries, published annually each January, typically covering data from two years prior.
• Utah gem-grade production: No government tracker exists; check individual mine operator disclosures directly, as noted in Gem Society’s reference material.
• Site-specific exploration potential: beryl mining workflow steps and satellite prospectivity mapping via Map Your Mining Site Here.

Frequently Asked Questions

1. Red beryl price per carat — what’s the real number?
   
   Raza Gems LLC market research puts the full range at $500–$30,000 per carat depending on grade. GemRock Auctions’ dealer surveys put premium faceted stones specifically at $10,000–$20,000 per carat. There is no single “spot price” because no exchange or audited index tracks this gem separately from industrial beryl.
2. How much is red beryl worth for a low-grade or included stone?
   
   Commercial-grade, more-included material sits toward the bottom of Raza Gems’ cited $500–$30,000/ct range, well below the premium faceted band.
3. How much is beryl worth versus red beryl specifically?
   
   These are different markets. USGS reports US beryl ore production (all industrial grades) at 4,330 metric tons in 2022, and US beryllium apparent consumption at 150 metric tons valued near $205 million in 2023 — priced per ton for aerospace and electronics alloys. Gem-grade red beryl is priced per carat in an entirely separate, much smaller market with no shared pricing mechanism.
4. Where does most red beryl come from?
   
   The Wah Wah Mountains of Utah supply roughly 85% of world production, per GemRock Auctions. Small, sporadic finds occur elsewhere, but Utah material anchors the market for quality and value.
5. Why is red beryl so rare?
   
   It requires a rare simultaneous combination of beryllium-rich rhyolitic host rock, hydrothermal fracture pathways, and trace manganese for color. Gem Society reports fewer than 1,000 carats of gem-grade material are produced in many recent years, with fewer than 10,000 stones cut globally per year.
6. Is most red beryl treated to enhance color?
   
   No. It’s conventionally sold untreated, and any enhancement is expected to reduce value among collectors and dealers.
7. How does parcel pricing differ from single-stone pricing?
   
   Rough parcels are priced on average color, clarity, and cutting yield potential across the lot; uniform-quality parcels sell at a premium to mixed lots. A parcel’s per-carat price isn’t directly comparable to a single faceted stone’s price.
8. How can mining companies or landowners evaluate red beryl potential on their site?
   
   Submit an area of interest via Map Your Mining Site Here for satellite-based prospectivity assessment, or see satellite based mineral detection for the underlying methodology.

The Bottom Line on Red Beryl Value

Red beryl is priced by grade, not by a market index — $500–$30,000 per carat across the full quality spectrum per Raza Gems, $10,000–$20,000 for premium faceted stones per GemRock Auctions, with Wah Wah Mountains, Utah provenance behind roughly 85% of world supply. That structure isn’t going to change: the geology producing it is as rare now as it was when GIA documented the 1978–2003 production run, and no new pricing exchange has emerged to standardize it. What changes year to year is dealer asking prices — check GemRock Auctions and Raza Gems LLC directly for current listings, and use the grading checklist above to judge any quote you receive against them.

For satellite-enabled mining, valuation, and prospecting services for rare minerals like red beryl, Get a Quote or Contact Us.

Ready to start? Map Your Mining Site Here