Comment

Gold prospecting ยท Licence guide

Gold Prospecting Licence South Australia: Costs and Steps

South Australia has no separate gold prospecting licence: fossicking needs landowner consent, and business exploration needs an exploration licence (A$1,046 to apply, 2026/27) or a mineral claim. NSW is similar.

Authored by Farmonaut Research & Content Team
Reviewed and verified by Farmonaut Mining & Mineral Exploration Team
Updated 5 November 2026 ยท 13 min read
Sentinel-2 Satellite View Of Tarcoola Gold District, Central Gawler Craton, South Australia
Sentinel-2 true-colour composite of Tarcoola gold district, central Gawler Craton, South Australia (30.70ยฐS, 134.58ยฐE). Contains modified Copernicus Sentinel data, 2022 to 2026, processed in Google Earth Engine.

Key takeaways

  • South Australia: hobby fossicking needs no state title, only landowner consent and hand tools (Department for Energy and Mining).
  • Exploration licence 2026/27: A$1,046 application base, A$210 annual administration plus A$16.00 to A$26.75 per km2 by zone; term up to 6 years.
  • A South Australian mineral claim costs A$735 to register, cannot be transferred and lapses if no lease is sought in 12 months.
  • NSW: no fossicking licence in the Resources Regulator guide; exploration licence costs A$1,000 plus A$12.50 per unit per year, term up to 6 years.
  • Australia mined 314 t of gold in 2025 on Geoscience Australia’s count, with 13,352 t of economic demonstrated resources.
In this article
  1. Do you need a gold prospecting licence in South Australia?
  2. South Australian titles compared: fossicking, claim and licence
  3. Exploration licence fees in South Australia
  4. How to apply for a South Australian exploration licence
  5. Where gold occurs in South Australia
  6. Gold prospecting in NSW: fossicking rules and limits
  7. NSW exploration licence costs and steps
  8. NSW and South Australia side by side
  9. Where NSW gold sits
  10. Where Australia ranks for gold output
  11. Check the ground with satellite imagery first
  12. Frequently asked questions

South Australia does not issue a document called a “gold prospecting licence”. Hobby fossickers need no state title, only the landowner’s consent (on Crown land, the Department for Environment and Water’s). Anyone who wants to explore for gold as a business needs an exploration licence (EL) or a registered mineral claim. On the 2026/27 fee schedule an EL costs A$1,046 to apply for, plus an annual fee of A$210 and a per-square-kilometre charge. New South Wales (NSW) is similar: the Resources Regulator’s fossicking guide lists no licence, and an exploration licence covers everything bigger.

This guide is for licence owners, consultants and investors who need to pick the right title in either state, price it and apply. It sets out the rules, the fees, the steps, a cost calculator for each state and the geology behind the ground. It is general information, not legal advice.

Do you need a gold prospecting licence in South Australia?

It depends on what you plan to do with the gold. South Australia’s regulator, the Department for Energy and Mining, splits the activity into three tiers.

  • Fossicking. This is the recreational gathering of minerals with no intent to sell them. The department’s fossicking page lists picks, shovels, gold pans and metal detectors as allowed tools. Mechanical equipment and explosives are not. You need the landowner’s permission before you enter.
  • Prospecting for minerals. The Mining Act 1971 gives any person a general right to prospect, but that right does not cover work that disturbs land with machinery or explosives (Mining Act 1971, section 20).
  • Exploration or mining for profit. This needs an exploration licence, a mineral claim, or a mining lease. Power-operated machinery counts as mining and is only allowed on a registered mineral claim or a mining lease, according to the fossicking page.

Older guides mention a “miner’s right” in South Australia. The current version of the Act (13 February 2025) sets out the general right to prospect and the mineral claim steps in Part 4 and does not mention a miner’s right, so check the regulator before paying anyone for one.

Some ground is closed to all of the above. The department states that fossicking and prospecting are not allowed in National Parks, Conservation Parks and Forest Reserves. You also cannot enter land held under a mineral claim, mining lease, retention lease, miscellaneous purposes licence or private mine without the holder’s approval. The Chapel Hill diggings near Echunga are closed to the public because of deep shafts and asbestos.

South Australian titles compared: fossicking, claim and licence

The table sets the options side by side. Fees are the 2026/27 amounts on the Mining Act schedule, which is exempt from GST (Department for Energy and Mining fee schedule, 1 July 2026).

Route Who it suits What it allows Main limits Fee (A$)
Fossicking Hobby and recreational users Pan, pick, shovel and metal detector for personal collection Landowner consent; no machinery, no explosives, no sale of the gold No state title; a permit applies at Watts Gully (ForestrySA)
General right to prospect Small-scale surveyors Prospecting under section 20 of the Act No machinery or explosives; landowner notice of entry None on the schedule
Mineral claim Small operators testing one patch of ground Exclusive right to prospect that ground; other work with the Director of Mines’ written approval Not transferable; up to 250 ha unless the Minister approves more; no more than 1 tonne removed without authority; claim lapses if no lease application within 12 months 735 to register
Exploration licence Companies, consultants, serious juniors Exploration operations of the kind written in the licence Term up to 6 years; work program, environmental program and land access steps 1,046 to apply, then annual fees
Mining lease Operators with a defined deposit Mining and processing Full assessment and landowner notices 2,091 base plus 1,129 advertising, plus assessment

The mineral claim rules come from the Act itself. A claim gives its owner an exclusive right to prospect the land in the claim, and the owner may not sell any minerals recovered. If the claim owner does not apply for a mining lease or retention lease within 12 months of registration, the claim lapses. After a claim lapses, the same holder cannot re-peg the area for 2 years without ministerial or Warden’s Court authority (Mining Act 1971, sections 25 to 27).

Exploration licence fees in South Australia

An exploration licence is the principal title for exploring in the state. It authorises the holder to explore for all minerals other than extractive minerals such as sand and gravel, subject to the Act, the regulations and the licence conditions. The Minister sets the term, up to 6 years in total, so plan your work program to fit.

Chart

South Australian exploration licence fees over time

A$, application base component and annual administration component; points are the 2020, 2025 and 2026 schedules only

$0$375$750$1,125$1,500202020252026Application base $1,046Annual administration $210Source: SA Mining (Fees) Variation Regulations 2020; Department for Energy and Mining fee schedules, 1 July 2025 and 1 July 2026.
$0$375$750$1,125$1,500202020252026Application baseAnnual administration$1,046$210Source: SA Mining (Fees) Variation Regulations 2020;Department for Energy and Mining fee schedules, 1 July 2025and 1 July 2026.
Both components rose about 20% between 2020 and 2026.

The 2026/27 schedule has these exploration licence amounts:

  • Application: A$1,046 base component. The advertising component on the schedule applies to mining leases and retention leases, not to the exploration licence column.
  • Annual administration component: A$210.
  • Annual regulation component: A$16.00 per square kilometre in zone 1, A$21.30 in zone 2 and A$26.75 in zone 3, with minimums of A$689, A$921 and A$1,161. The Minister declares the zones by Gazette notice, so confirm which zone your ground is in with the Department before you budget.
  • Renewal: A$735.
  • Environmental program (E-PEPR): the generic E-PEPR for low-impact mineral exploration carries no fee. A new, tailored E-PEPR is A$1,793, rising to A$2,390 or A$3,586 when referral or ministerial approval is needed.

The fees are indexed each year. The same application base component was A$873 in 2020 and A$1,013 on the 2025 schedule, so budget for a rise in the base component. The 2020 regulations also listed a separate A$942 advertising component for exploration licences, which the 2025 and 2026 exploration licence columns do not show. The chart shows the application and annual administration components from the three schedules we opened (2020, 2025 and 2026; the gaps between points are uneven).

Fees are paid annually in advance, and the department invoices them the month before the tenement’s anniversary date. Since 1 July 2025, surrender or area-reduction applications on exploration licences do not normally earn a pro-rata refund of fees already paid, although a partial surrender lodged before the anniversary date gets a credit on the reduced area (fees and calculators page). Your real cost is also set by the work program: the licence carries expenditure rules, and area can be taken back if you do not meet them.

Calculator

What would a South Australian exploration licence cost?

Enter your own area and the zone rate from the schedule.

km2

A$/km2

A$

A$

A$

years
$11,906A$ fees over the term (application plus annual fees)
  • Annual fee: $1,810
  • Annual fee per km2: $18

Example values only. Defaults are the 1 July 2026 Mining Act schedule for zone 1 (Department for Energy and Mining); zones are declared by the Minister by Gazette notice (Mining Regulations 2020, regulation 87), so confirm your zone with the Department and check the latest schedule. Annual fee = administration component plus the larger of the minimum or area times the zone rate. Excludes work-program spend, E-PEPR fees, land access costs and renewal. Amounts in A$, exempt from GST.

How to apply for a South Australian exploration licence

The department runs applications through its online MERS portal, and it uses SARIG, the state’s geoscience map system, for finding open ground. The steps below follow the regulator’s own pages.

  1. Find ground that is open. In SARIG, check the layers for mineral exploration licences, tenement applications, release areas and land access limits such as parks, Aboriginal land and Defence land.
  2. Read the licence guideline. Minerals Regulatory Guideline MG33 describes the exploration licensing framework, and the department publishes advisory information for new licence holders.
  3. Define the boundary and the work. The application must identify the land boundary to the standard the Act requires and carry the prescribed information and fee.
  4. Lodge in MERS. You can create and submit applications, view active tenements, answer requests for information and see reporting duties in the portal.
  5. Prepare the environmental program. Use the generic E-PEPR for low-impact work or lodge a new one for drilling and earthworks.
  6. Give notice to landowners. At least 42 days before exploration starts, you must either sign a written land access agreement or serve Form 21A (prospecting and low-impact work) or Form 21B (advanced exploration) on the landowner. Some land is exempt unless the owner waives the exemption (land access guidance).
  7. Pay annual fees and file reports. Fees fall due each year on the anniversary, and the portal lists upcoming return dates.

Landowners can claim compensation for economic loss, hardship and inconvenience, so build a land-access line into your budget. Public registers help you do this homework before you spend anything. The video below shows how an Australian state’s map and register tools reveal open ground, using Western Australia as the worked example; the same habit applies to SARIG and NSW MinView.

How to read an Australian state

โ–ถ How to read an Australian state’s public map and register tools before prospecting, with Western Australia as the example ยท 4:13

Where gold occurs in South Australia

The main gold province is the central Gawler Craton, an ancient block of rock in the state’s centre-west. Peer-reviewed work by Fraser and colleagues describes a Mesoproterozoic gold province at least 300 km long, with the prospects of Tunkillia, Nuckulla Hill, Barns and Weednanna and the historically mined Tarcoola deposit (Australian National University research portal). Gold there sits in disseminated grains and thin veins along brittle faults and shear zones, mostly inside granites of about 1,715 to 1,680 million years old.

For a prospector the useful clues are the alteration zones. The same paper reports intense sericite and pyrite alteration and quartz veining next to the gold, and chlorite, epidote and hematite further out. The gold-bearing zones are also low in iron oxides, which shows up as demagnetised zones on magnetic maps. Those patterns are what a desk study looks for before any pegging.

The Gawler Craton also hosts large copper-gold systems such as Olympic Dam, and the state’s geoscience portal SARIG holds the open-file drilling reports. Read the prior reports for any ground you are considering before you apply, because most good areas have had some exploration already.

Gold prospecting in NSW: fossicking rules and limits

For searches such as “nsw gold prospecting”, the first answer is that fossicking is a lawful activity in NSW, and the Resources Regulator’s guide lists consents and limits rather than a licence. The rules sit in the Mining Act 1992 and the Mining Regulation 2016 (NSW Resources, Fossicking: A guide to fossicking in NSW, 2025).

Rule NSW limit
Equipment No explosives and no power-operated equipment for surface disturbance, excavation or processing; hand tools, pans, sieves, non-powered river sluices and metal detectors are permitted
Ground disturbed No more than 1 cubic metre in any 48 hours; replace soil and rock to rebuild the soil profile
Gold taken, per person per 48 hours Up to 10 kg of gold-bearing material, 5 nuggets of 10 g or more, and 50 g of other gold
Royalties None on minerals found while fossicking
Native title land or water Hand-held implements only; no excavation or clearing

You must also have the right consent for where you stand. Private land needs the landholder’s consent, and a holder of a mineral claim, authority or opal prospecting licence must agree before you work their ground. Native title land needs the consent of the registered native title body corporate, and State forests need a permit from Forestry, with a court-imposed penalty of A$2,200 for fossicking there without one (as the guide states under the Forestry Act 2012).

NSW has declared Fossicking Districts, shown on the MinView map. Inside a district you do not need the consent of an exploration licence holder, but you still need every other consent on the list. Outside a district you must get the licence holder’s consent.

NSW exploration licence costs and steps

An NSW exploration licence gives the holder exclusive rights to explore for specified minerals in a designated area for up to 6 years. An exploration (mineral owner) licence is limited to 2 years. The licence does not allow mining and does not grant a right of entry, so you must negotiate access with each landholder. NSW Resources says the likelihood of an exploration licence progressing to a mining lease is low (NSW Resources, apply for an exploration licence).

From drilling to refining: how gold goes from rock to bar

โ–ถ From drilling to refining: how gold goes from rock to bar ยท 5:27

The fees come from Schedule 9 of the Mining Regulation and the department’s fee page (NSW Resources, Mining Act fees):

  • Application: A$1,000 for Groups 1 to 8, 10 and 11 minerals, plus A$12.50 per year of tenure for each unit of land (A$6.25 per extra mineral group).
  • Renewal: A$2,000 plus the same per-unit charge.
  • Annual rental: A$20 per square kilometre, which the schedule also states as A$60 per unit, so one unit is about 3 square kilometres.
  • Assessment lease: A$2,000 application plus A$6 per hectare per year of tenure.

Native title is part of every application. You choose between a standard licence carrying the native title condition, proof that native title is extinguished, the Right to Negotiate process, or a low-impact licence. The standard route lets you prospect only on land where native title is extinguished until you get the Minister’s consent for the rest.

Apply through the Titles Management System portal, after checking open ground in MinView and past reports in DIGS. An exploration licence moves toward mining only through a work program that proves a resource. The video shows the later stages, from drilling to refining, for context.

Calculator

What would an NSW exploration licence cost?

Enter the number of units and the term you will apply for.

units

years

groups

A$

A$

A$

A$
$11,875A$ fees over the term (application, tenure charge and rental)
  • Application charge: $2,875
  • Annual rental: $1,800

Example values only. Defaults are the NSW Mining Act fee schedule (NSW Resources): A$1,000 application, A$12.50 per unit per year of tenure for the first mineral group, A$6.25 per extra group, rental A$60 per unit per year. One unit is about 3 km2 on the schedule’s own conversion. Excludes the administrative levy, work-program spend and land access costs. Amounts in A$.

NSW and South Australia side by side

The table compares the two states using the regulators’ own pages.

Chart

What it costs to lodge each type of application

A$, fee on lodgement, excluding per-unit and per-area charges; SA mining lease shows the base component only (advertising A$1,129 and assessment extra)

$0$600$1,200$1,800$2,400SA mineral claim$735SA renewal$735NSW exploration licence$1,000SA exploration licence$1,046NSW renewal$2,000NSW assessment lease$2,000SA mining lease$2,091Source: NSW Resources Mining Act fees (Schedule 9); SA Department for Energy and Mining Mining Act fee schedule, 1 July 2026.
$0$600$1,200$1,800$2,400SA mineral claim$735SA renewal$735NSW exploration licence$1,000SA exploration licence$1,046NSW renewal$2,000NSW assessment lease$2,000SA mining lease$2,091Source: NSW Resources Mining Act fees (Schedule 9); SADepartment for Energy and Mining Mining Act fee schedule, 1July 2026.
NSW renewals and assessment leases cost twice a first exploration application; in South Australia a renewal costs less than a new licence.
Item New South Wales South Australia
Licence for hobby fossicking None listed in the Resources Regulator guide None; landowner consent needed
Hobby equipment Hand tools, non-powered sluices, metal detectors Picks, shovels, pans, hand sluices, metal detectors
Business exploration title Exploration licence, Mining Act 1992 Exploration licence or mineral claim, Mining Act 1971
Application fee (A$) 1,000 plus per-unit charge 1,046 base component
Maximum licence term Up to 6 years per term Up to 6 years for the first term; renewals can take it to 18 years in all
Land access Licence gives no right of entry; negotiate with landholders Written agreement or notice of entry at least 42 days before work starts
Where to find open ground MinView SARIG and the MERS portal
Fossicking in national parks Generally not permitted; consent may be given in some cases Not permitted in National Parks, Conservation Parks and Forest Reserves

For a map of historical and operating mines in the east of the country, see our NSW gold mines map. The chart compares the application-type charges for the common titles in A$.

Where NSW gold sits

NSW has a gold endowment, meaning past production plus identified resources, of more than 3,347 tonnes, and current resources of more than 2,188 tonnes (NSW Government, Gold: Opportunities in New South Wales, December 2021). The state hosts several deposit types: porphyry copper-gold at Cadia and Northparkes, epithermal gold at Cowal, orogenic gold at Tomingley, McPhillamys and Hillgrove, and gold-rich volcanic-hosted massive sulfide deposits such as Woodlawn.

The Lachlan Orogen is described as generally poorly explored for gold. The Macquarie Arc inside it holds about 59 million ounces, including the Cadia deposits. Recent finds at McPhillamys, Boda, Tomingley and Hera are cited as signs of prospectivity. The brochure dates from December 2021, so check current company reports before using any resource figure.

Where Australia ranks for gold output

Geoscience Australia’s 2026 preliminary tables record Australian gold mine production of 314 tonnes for 2025, and economic demonstrated resources of 13,352 tonnes, up from 12,955 tonnes a year earlier (Geoscience Australia, 2026 Preliminary Tables). The USGS gives a lower estimate of 280 tonnes for 2025, third behind China and Russia (USGS Mineral Commodity Summaries 2026). Different counting rules explain the gap, so state which source you quote. Surbiton Associates put financial-year 2025 output at 300 tonnes, just short of the 328-tonne record of 1999-2000, and noted that producers were blending in low-grade stockpiles (Kitco, 3 September 2025).

Chart

Largest gold producers, mine output

Tonnes of gold

20242025 (estimate)0 t100 t200 t300 t400 tChina377 t380 tRussia310 t310 tAustralia284 t280 tCanada200 t200 tUnited States163 t160 tSource: USGS Mineral Commodity Summaries 2026, gold.
20242025 (estimate)0 t100 t200 t300 t400 tChina377 t380 tRussia310 t310 tAustralia284 t280 tCanada200 t200 tUnited States163 t160 tSource: USGS Mineral Commodity Summaries 2026, gold.
Australia ranks third on the USGS count, behind China and Russia.

For a wider view of how much gold has been mined, see our estimate of total above-ground gold, and for the geology by state, the Australia mineral deposits map. Most national output comes from a few very large mines in Western Australia; a licence in NSW or South Australia is usually an exploration play, not a production one.

Check the ground with satellite imagery first

Before you pay application fees or send in a drill rig, a desk screen can rank blocks of ground. A satellite cannot see gold itself. It can map the rock around a gold system: iron-oxide staining, clay and mica minerals, silica and fault lines. That matches what the South Australian research describes, since sericite and clay alteration forms a halo around the central Gawler gold.

Farmonaut, a US-based company, builds satellite-based mineral detection reports from a licence boundary, with results in 5 to 20 business days. The results are exploration targets that sit ahead of a resource estimate, and they are not a substitute for field work, land access or the licence steps above. To discuss a project, contact us or request a quote.

What a satellite can and cannot see when it comes to gold

โ–ถ What a satellite can and cannot see when it comes to gold ยท 2:00

Frequently asked questions

Do I need a licence to prospect for gold in South Australia?

Not for recreational fossicking with hand tools, which needs the landowner’s consent. For commercial exploration you need an exploration licence or a registered mineral claim under the Mining Act 1971.

How much does a South Australian exploration licence cost?

On the 2026/27 schedule the application base component is A$1,046. The annual fee is A$210 plus A$16.00 to A$26.75 per square kilometre by zone, subject to a minimum of A$689 to A$1,161. Use the calculator above to total it for your area.

Can I use a metal detector for gold in South Australia?

Yes, on land where you have permission and where fossicking is allowed. The department lists metal detectors as permitted fossicking equipment. Parks and forest reserves are closed to fossicking.

Where can I fossick for gold in South Australia?

The department names the Jupiter Creek diggings near Echunga as open to fossicking, and designated areas of the Mount Crawford Forest (Watts Gully) with a ForestrySA permit. The Chapel Hill diggings are closed.

What is a mineral claim in South Australia?

It is a registered area where the owner has an exclusive right to prospect. Registration costs A$735, the claim cannot be transferred, it can cover up to 250 hectares unless the Minister approves more, no more than 1 tonne can be removed without authority, and it lapses if you do not apply for a lease within 12 months.

Do you need a licence to fossick for gold in NSW?

The NSW Resources guide sets out equipment, quantity and consent rules but no fossicking licence. You still need consent from the landholder, any claim or title holder outside a fossicking district, and the native title body where it applies.

How much gold can you keep when fossicking in NSW?

Per person in any 48 hours: up to 10 kg of gold-bearing material, 5 nuggets of 10 g or more, and 50 g of other gold. No royalties apply to what you find while fossicking.

How long does an NSW exploration licence last?

Up to 6 years for a standard licence, and 2 years for an exploration (mineral owner) licence. It does not allow mining.

What does an NSW exploration licence cost?

The application fee is A$1,000 plus A$12.50 per unit for each year of tenure for the first mineral group. Annual rental is A$20 per square kilometre.

Is gold prospecting profitable in Australia?

Recreational finds are small, and exploration rarely turns into a mine. NSW Resources says the likelihood of an exploration licence reaching a mining lease is low, and the South Australian regulator says fewer than 1% of exploration projects result in mining.

Can I use satellite imagery to choose where to apply?

Yes, as a screening step. Satellite data maps alteration and structure rather than gold, so treat the output as a target to test on the ground.

This page is for information only. It is not legal or investment advice. Confirm the rules and current fees with the regulator before you apply. Always get landowner permission, follow the fossicking and safety rules, and never use mercury.

Authored by: Farmonaut Research & Content Team

Reviewed and verified by: Farmonaut Mining & Mineral Exploration Team

Reviewed November 2026 against the South Australian Department for Energy and Mining pages and 2026/27 fee schedule, the Mining Act 1971 text, NSW Resources fee and fossicking pages, Geoscience Australia and the USGS.

Farmonaut mining

Screen your licence area from space

Request a quote for a satellite mineral-detection report on a licence boundary before you commit to fieldwork.

Farmonaut Mining Pro 3D Target View (Sample, Synthetic Data)

Mining Pro sample view, synthetic data

Sources

  1. SA Department for Energy and Mining, Exploration licensing: energymining.sa.gov.au
  2. SA Department for Energy and Mining, Fossicking: energymining.sa.gov.au
  3. SA Department for Energy and Mining, Mining Act fees and charges schedule (1 July 2026): energymining.sa.gov.au
  4. SA Department for Energy and Mining, Mining Act fees schedule (1 July 2025): energymining.sa.gov.au
  5. SA Mining (Fees) Variation Regulations 2020: legislation.sa.gov.au
  6. SA Department for Energy and Mining, Fees and calculators: energymining.sa.gov.au
  7. SA Department for Energy and Mining, Mineral exploration and land access: energymining.sa.gov.au
  8. SA Mining Act 1971 (current version, 13 February 2025): legislation.sa.gov.au
  9. Fraser et al., Mesoproterozoic gold in the central Gawler craton (ANU research portal): researchportalplus.anu.edu.au
  10. NSW Resources, Fossicking: A guide to fossicking in NSW (2025): resources.nsw.gov.au
  11. NSW Resources, Apply for an exploration licence: resources.nsw.gov.au
  12. NSW Resources, Mining Act fees: resources.nsw.gov.au
  13. NSW Government, Gold: Opportunities in New South Wales (December 2021): resources.nsw.gov.au
  14. Geoscience Australia, 2026 Preliminary Tables: ga.gov.au
  15. USGS, Mineral Commodity Summaries 2026: Gold: pubs.usgs.gov
  16. Kitco, Australian gold production totals 300 tonnes in FY 2025 (Surbiton Associates): kitco.com



Discussion

Questions, corrections or field experience? Share them below. First-time comments are reviewed before they appear, and your email is never published.

No comments yet. Be the first to add a question or your experience.

Leave a comment

Farmonaut Farmonaut Trusted by 200,000+ users and 100+ businesses 200,000+ users trust us Get started