Comment

Crop protection ยท Post-harvest fungicides

Imazalil and Thiabendazole: Uses, Limits and Resistance

Two post-harvest fungicides that keep citrus, bananas and other fruit from rotting in storage. How each works, the US residue limits for each crop, why resistance is the main problem, and how to test whether treatment pays.

Authored by Farmonaut Research & Content Team
Reviewed and verified by Farmonaut Agricultural Experts Team
Updated 5 November 2026 ยท 12 min read
Sentinel-2 Satellite View Of Citrus Groves In Tulare County, California
Sentinel-2 view of Citrus groves in Tulare County, California. Contains modified Copernicus Sentinel data, processed in Google Earth Engine.

Key takeaways

  • Imazalil is a FRAC group 3 (DMI) fungicide; thiabendazole is FRAC group 1 (MBC). FRAC rates group 1 resistance risk as high and group 3 as medium.
  • US tolerances: thiabendazole 10 ppm on citrus, pome fruit, avocado and mango, 3 ppm on bananas, 40 ppm on mushrooms (40 CFR 180.242).
  • Imazalil tolerances: 10 ppm on post-harvest citrus, 3 ppm on bananas, 200 ppm on citrus oil (40 CFR 180.413).
  • USDA ARS reports that resistance to both products is widespread in citrus decay fungi, so rotation and sanitation matter.
  • Cold storage supports both: an orange respires about 6 mg CO2/kg/h at 5 ยฐC and 28 at 20 ยฐC (USDA ARS Handbook 66).
In this article
  1. What are imazalil and thiabendazole?
  2. How each fungicide works
  3. Why post-harvest fungicides matter for fruit quality
  4. Where they are allowed: US tolerances
  5. Residues, monitoring and safety
  6. How packhouses apply them
  7. Cold storage and decay
  8. Resistance: the main limit on both products
  9. Alternatives and add-ons
  10. Does treatment pay? Test your own numbers
  11. Linking orchard data to packhouse results
  12. How we checked the facts
  13. FAQ

Imazalil and thiabendazole are two post-harvest fungicides that packinghouses apply to citrus, bananas and some other fruit to stop mould from rotting it between the packing line and the shop shelf. Imazalil (also called enilconazole) blocks the fungus from making sterols for its cell membranes. Thiabendazole (TBZ) binds the protein tubulin and stops fungal cells from dividing. They work in different ways, so packers often use them together or in rotation against green mould, blue mould and stem-end rots.

This guide explains what each one does, which crops they are allowed on in the United States, how much residue the law allows, why resistance is the biggest practical problem, and how cold storage supports both products. It includes three charts built from official tables and a calculator to test whether a treatment pays for itself on your own volumes. Always check the product label and your local rules, and ask a licensed adviser before you change a treatment programme.

What are imazalil and thiabendazole?

Both are synthetic fungicides with a long history in fruit packing. They are often named together because they cover the same diseases on the same fruit, but they belong to different chemical families.

Imazalil is an imidazole fungicide. The Wikipedia entry notes that imazalil is also sold as enilconazole, with trade names such as Freshgard, Fungaflor and Nuzone. The EPA fact sheet on imazalil reregistration describes it as a systemic fungicide for post-harvest use on bananas, citrus and some other fruit, plus seed treatments for barley and wheat. Janssen Pharmaceutica first registered it in the United States in 1983.

Thiabendazole is a benzimidazole. It was first developed as a medicine against worms in livestock and was approved for sheep in 1961, according to the summary of thiabendazole’s history and uses. As a fungicide it binds fungal tubulin, the protein that builds the cell’s internal skeleton, so the fungus cannot divide. It is also a food additive with the number E233 in some markets, but it is not approved as a food additive in the EU.

Feature Imazalil Thiabendazole (TBZ)
Chemical group Imidazole (DMI) Benzimidazole (MBC)
FRAC group 3 1
How it works Blocks sterol making in the fungal membrane Binds tubulin and stops cell division
Main post-harvest uses (US) Citrus, bananas Citrus, bananas, pome fruit, mango, papaya, sweet potato and others
Resistance risk (FRAC) Medium High
Main targets Green and blue mould Green and blue mould, stem-end rots, crown rot

How each fungicide works

The Fungicide Resistance Action Committee (FRAC) sorts fungicides by mode of action so growers can rotate between groups. Its FRAC Code List puts thiabendazole in group 1, the methyl benzimidazole carbamates (MBC), and imazalil in group 3, the demethylation inhibitors (DMI). FRAC rates the intrinsic resistance risk of group 1 as high and of group 3 as medium.

Imazalil (group 3). It stops an enzyme the fungus needs to make ergosterol, a key part of its cell membrane. Without enough ergosterol the membrane leaks and growth slows.

Thiabendazole (group 1). It binds tubulin and stops the fungus from building the spindle it needs to split its nucleus. Single changes in the beta-tubulin gene can make a fungus fully resistant. FRAC lists mutations at position 198 (E198A/G/K) as the common cause of benzimidazole resistance, which is why TBZ should never be the only tool in a packhouse.

FRAC also publishes recommendations by mode-of-action group, including separate guidance for DMI and MBC fungicides. Those pages are the best place to check current advice before you plan a season.

Why post-harvest fungicides matter for fruit quality

Fruit keeps living after harvest. It breathes, loses water and ages. Any small wound from picking, clipping or brushing is an entry point for spores that are already on the fruit or in the packhouse air. In citrus, green mould (Penicillium digitatum) and blue mould (Penicillium italicum) are the main post-harvest decays.

The USDA Agricultural Research Service handbook on the commercial storage of fruits, vegetables and florist stocks names thiabendazole, dichloran and imazalil as examples of chemicals used for post-harvest treatments. It also warns that intensive and continuous use of fungicides against blue and green mould has led to resistance in the fungi that cause them.

Export rules can make treatment mandatory. The University of Florida’s Florida Citrus Production Guide chapter on citrus black spot says fruit from quarantined areas that ships fresh must be washed, brushed, disinfected, treated at labelled rates with imazalil or thiabendazole (TBZ), and waxed in an APHIS-approved packinghouse. In that case the fungicides are part of the legal pathway to market, not just a quality choice.

Other fungal problems also respond. The UC IPM guideline on Alternaria rot in citrus says post-harvest sprays with imazalil, azoxystrobin, fludioxonil or mixtures may give partial control. “Partial” is the honest word: post-harvest chemistry works best on fruit that left the orchard in good shape.

A guide to common plant diseases and pests and how to control them in the field.

โ–ถ A guide to common plant diseases and pests and how to control them in the field. ยท 17:29

Where they are allowed: US tolerances

A tolerance is the most residue the law allows on a food. In the United States, tolerances are set in Title 40 of the Code of Federal Regulations. The table in 40 CFR 180.242 for thiabendazole covers a long list of foods, from grains to mushrooms. The chart shows the main fresh produce entries.

Chart

US thiabendazole tolerances on fresh produce

Parts per million (ppm), selected commodities

010203040Mushroom40Cantaloupe15Citrus fruit10Pome fruit10Avocado10Mango10Papaya5Strawberry5Banana3Sweet potato3Source: 40 CFR 180.242, table 1 to paragraph (a)(1), current text read November 2026.
010203040Mushroom40Cantaloupe15Citrus fruit10Pome fruit10Avocado10Mango10Papaya5Strawberry5Banana3Sweet potato3Source: 40 CFR 180.242, table 1 to paragraph (a)(1), currenttext read November 2026.
Mushrooms carry the highest limit; citrus, pome fruit, avocado and mango sit at 10 ppm. Cantaloupe, avocado and strawberry limits apply to imports only (no US registrations).

Mushrooms carry the highest TBZ tolerance at 40 parts per million (ppm). Cantaloupe is set at 15 ppm. Citrus fruit, pome fruit, avocado and mango are each at 10 ppm. Papaya and strawberry are at 5 ppm, and bananas and sweet potatoes at 3 ppm. Cantaloupe, avocado and strawberry carry a footnote saying there are no US registrations on those crops, so their limits cover imported fruit only. A tolerance is not the same as a label: check that a registered product lists your crop before you assume a use is allowed on your farm.

The imazalil list is much shorter. The table in 40 CFR 180.413 for imazalil sets 10 ppm for post-harvest citrus fruit, 3 ppm for bananas, 25 ppm for dried citrus pulp and 200 ppm for citrus oil. Wheat and barley grain are at 0.1 ppm, reflecting seed-treatment use. Citrus oil is high because the fungicide concentrates in the peel, where the oil comes from.

Other markets set their own limits, called maximum residue levels (MRLs) in the EU and UK. They do not always match US tolerances. If you export, check the destination’s limit for the exact fruit before you pick a dose, and keep records of what you applied.

Chart

US imazalil tolerances by commodity

Parts per million (ppm); citrus oil (200 ppm) left out for scale

0.06.212.518.825.025.0Citrus, dried pulp10.0Citrus,post-harvest3.0Banana0.1Wheat grain0.1Barley grainSource: 40 CFR 180.413(a)(1), current text read November 2026.
0.06.212.518.825.0Citrus, dried pulp25.0Citrus, post-harvest10.0Banana3.0Wheat grain0.1Barley grain0.1Source: 40 CFR 180.413(a)(1), current text read November 2026.
Post-harvest citrus is allowed 10 ppm and bananas 3 ppm; grain limits are low because imazalil is used there only as a seed treatment.

Residues, monitoring and safety

Regulators check residues on food from the market, not only at registration. In the United States, the USDA’s Pesticide Data Program is the national residue monitoring programme; it samples and tests produce and publishes the results each year.

In Europe, the EFSA review of the 2024 EU report on pesticide residues in food lists both imazalil and thiabendazole among the substances tested. It notes non-compliant results for thiabendazole in melons from outside the EU internal market, an example of why exporters must check MRLs for each crop.

On safety, EPA’s imazalil fact sheet classifies it as “likely to be carcinogenic in humans” under its 1999 draft cancer guidelines, based on rodent studies. EPA quantified the cancer risk and completed the tolerance reassessment on 12 July 2002. Those findings are the reason labels set limits on dose, method and protective equipment. Workers who mix, dip or spray these products must follow the label’s protective gear and re-entry rules.

For shoppers, washing and peeling reduce residues on the peel, which is where post-harvest products sit. Citrus zest and peel products carry more residue than the flesh, which is why the citrus oil tolerance is higher.

How packhouses apply them

Most of the work happens on the packing line. The exact steps depend on the label and the fruit, but the general order is similar.

  1. Harvest with care. Clip stems, avoid drops and keep picking bins clean. Fewer wounds mean fewer infections.
  2. Drench or dump tank. Some packers drench bins soon after harvest, before degreening or storage, so the fungicide reaches new wounds early.
  3. Wash and sanitise. Fruit is washed, brushed and passed through a sanitiser to cut the spore load on the surface.
  4. Fungicide application. Imazalil and TBZ are applied as an aqueous spray or dip, or mixed into the fruit wax. Label rates and contact time decide how much ends up on the fruit.
  5. Wax and dry. Wax reduces water loss and carries any fungicide added to it.
  6. Cool and store. Fruit goes into cold rooms at the temperature right for that crop.

Rate, water temperature, pH and contact time all change how much active ingredient the peel takes up. Keep the tank concentration in range with regular tests, change the solution on schedule, and record each batch. Too little gives poor control and speeds resistance. Too much risks breaking the tolerance.

The ARS handbook also lists heat treatments: hot water at 50 ยฐC for 3 minutes combined with imazalil was used on lemons in one study. Heat can help, but citrus peel can be scalded, so trials on your own fruit come first.

Cold storage and decay

Fungicides work better when fruit is cold. Cooling slows the fruit’s breathing (respiration) and slows fungal growth at the same time. The ARS handbook gives respiration rates for citrus at different temperatures. An orange breathes about 6 mg of CO2 per kilogram per hour at 5 ยฐC but about 28 mg at 20 ยฐC, more than four times as fast.

Chart

Citrus respiration rises with temperature

mg CO2 per kg per hour at each storage temperature

081522305 ยฐC10 ยฐC15 ยฐC20 ยฐCOrange 28Mandarin 25Source: USDA ARS Agriculture Handbook 66, Table 1, rates of respiration.
081522305 ยฐC10 ยฐC15 ยฐC20 ยฐCOrangeMandarin2825Source: USDA ARS Agriculture Handbook 66, Table 1, rates ofrespiration.
Both fruits breathe about four times faster at 20 ยฐC than at 5 ยฐC, so slow cooling eats into storage life.

The practical point: a fungicide gives fruit a head start, but warm, slow handling erodes it. Move fruit from field to cooler fast, keep the cold chain unbroken, and match the room temperature to the crop, because some citrus is hurt by too much cold.

Resistance: the main limit on both products

Resistance is the main practical limit on these two fungicides. The ARS handbook states that resistance to thiabendazole and imazalil is widespread in citrus decay fungi. Once a resistant strain builds up in a packhouse, it can spread across seasons on bins, walls and air.

FRAC’s advice for at-risk groups follows a few rules:

  • Rotate or mix modes of action. Do not rely on one group. Pair a group 1 or group 3 product with a different group, such as fludioxonil (group 12), where the label allows.
  • Use full label rates. Low doses select for partly resistant strains.
  • Cut the spore load. Sanitise bins, lines, drenchers and rooms. Remove rotten fruit fast.
  • Test. Spore traps or plate tests from the packhouse show whether resistant strains are rising.
  • Limit the number of uses. Avoid treating the same fruit with the same group at several steps.

The benzimidazole story shows the risk. After benomyl and TBZ were used heavily, resistant Penicillium strains became common, and the ARS handbook notes that many products once used after harvest are no longer permitted or no longer effective.

Alternatives and add-ons

No single product solves post-harvest decay. Packers combine several tools:

  • Other fungicides. UC IPM lists azoxystrobin and fludioxonil, alone or mixed with imazalil, as post-harvest options against Alternaria rot. Each has its own FRAC group and its own resistance rules.
  • Salts and sanitisers. Sodium bicarbonate, sodium carbonate and chlorine-based washes lower the spore load. The ARS handbook notes that chlorine dioxide and peracetic acid can sanitise packing surfaces.
  • Heat. Hot-water dips or curing can reduce green mould, but need care to avoid peel damage.
  • Biological products. Some antagonist yeasts and bacteria are sold for post-harvest use. Results vary with fruit and conditions.
  • Orchard health. Fruit from healthy, well-fed trees with fewer wounds stores better. Field disease control lowers the spore load that reaches the packhouse.
Six plain steps to start precision farming, from field maps to satellite monitoring.

โ–ถ Six plain steps to start precision farming, from field maps to satellite monitoring. ยท 4:18

Does treatment pay? Test your own numbers

The calculator below compares the value of fruit saved from decay with the cost of the treatment. All defaults are example values set near break-even, not benchmarks. Put in your own cartons, decay rates, carton value and treatment cost.

Try the numbers for your own farm below.

Calculator

Does a post-harvest fungicide pay for itself?

Enter your own volumes, decay rates and costs.

cartons

%

%

US$

US$
0US$ net gain per season (negative means the treatment costs more than it saves)
  • Cartons saved from decay: 100 cartons
  • Value of fruit saved: 2,000 US$
  • Total treatment cost: 2,000 US$

Example values only, set near break-even; they are not benchmarks. Use your own packhouse records for decay rates and today’s prices for carton value and treatment cost. The result ignores claims, rejected loads and market access, which can matter more than the carton count. Check the product label and local rules before any treatment.

Linking orchard data to packhouse results

Decay that shows up in the cold room often starts in the field. Stressed trees, rain before harvest, hail and insect damage all raise the number of wounded or weak fruit. Many growers now keep field records by block and compare them with packhouse decay reports, so they can spot which blocks need extra care at harvest.

Satellite crop monitoring is one way to keep those block records. Farmonaut shows vegetation and moisture maps for each field through the season, so a grower can see which blocks were under stress before harvest and flag them for the packhouse. It does not measure fungicide residue or detect mould on fruit; it adds a field view to the packhouse data.

Related pages on our site: tracing produce from farm to buyer, large-scale farm management, satellite data for developers, weather and satellite API docs, farm carbon footprinting, fleet and resource management and web and mobile apps.

How to monitor crops by satellite in the Farmonaut web app.

โ–ถ How to monitor crops by satellite in the Farmonaut web app. ยท 8:43

How we checked the facts

Tolerances come from the current text of 40 CFR 180.242 and 180.413. Mode of action and resistance risk come from the FRAC Code List. Use history and the cancer classification for imazalil come from EPA’s reregistration fact sheet. Storage, respiration and resistance notes come from USDA ARS Agriculture Handbook 66. Quarantine packing rules come from the UF/IFAS Florida Citrus Production Guide. EU residue findings come from the 2024 EU report. Each source is listed at the end. Rules change, so check the current label and the destination market’s limits before you act.

FAQ

What is imazalil and thiabendazole used for?

Both are post-harvest fungicides. Packhouses apply them to citrus, bananas and some other fruit to control green mould, blue mould and other rots during storage and shipping. Imazalil is also used as a seed treatment for wheat and barley.

Are imazalil and thiabendazole the same?

No. Imazalil is an imidazole (FRAC group 3) that blocks sterol making. Thiabendazole is a benzimidazole (FRAC group 1) that binds tubulin. They are used together because they act in different ways.

Is fruit treated with imazalil safe to eat?

Fruit within the legal tolerance is allowed for sale. In the United States the tolerance for post-harvest citrus is 10 ppm. EPA classifies imazalil as a likely human carcinogen based on rodent studies, and sets label limits to keep exposure low. Washing and peeling cut the residue you eat.

Why do some packhouses see poor control?

Resistance is the common cause. The USDA ARS handbook says resistance to thiabendazole and imazalil is widespread in citrus decay fungi. Rotating modes of action, full label rates and strict sanitation help.

Can organic fruit be treated with these products?

No. Both are synthetic fungicides and are not allowed under organic rules in the United States or the EU. Organic packers rely on sanitation, cold storage and approved materials.

Authored by: Farmonaut Research & Content Team

Reviewed and verified by: Farmonaut Agricultural Experts Team

Reviewed November 2026 against 40 CFR 180.242 and 180.413, the FRAC Code List 2024, EPA’s imazalil reregistration fact sheet, USDA ARS Agriculture Handbook 66, the UF/IFAS Florida Citrus Production Guide, UC IPM citrus guidelines and the 2024 EU pesticide residue report.

Farmonaut crop monitoring

See your orchard blocks from space

Draw your blocks once and Farmonaut shows satellite vegetation and moisture maps for them through the season, on web, Android or iOS.

Open The Farmonaut Crop Monitoring Web AppGet The Farmonaut App On Google PlayGet The Farmonaut App On The App Store
Farmonaut Web App With A Satellite Crop Health Map

Sources

  1. 40 CFR 180.242, Thiabendazole; tolerances for residues (current text, Cornell LII): law.cornell.edu
  2. 40 CFR 180.413, Imazalil; tolerances for residues (current text, Cornell LII): law.cornell.edu
  3. US EPA, Imazalil Reregistration Eligibility Decision fact sheet (2002): archive.epa.gov
  4. FRAC, FRAC Code List 2024: fungicides sorted by mode of action: frac.info
  5. FRAC, Recommendations by FRAC mode of action group: frac.info
  6. USDA ARS, Agriculture Handbook 66: The Commercial Storage of Fruits, Vegetables, and Florist and Nursery Stocks: ars.usda.gov
  7. UF/IFAS EDIS, 2026-2029 Florida Citrus Production Guide: Citrus Black Spot (PP279/CG088): edis.ifas.ufl.edu
  8. UC Statewide IPM Program, Alternaria Rot: Citrus Pest Management Guidelines: ipm.ucanr.edu
  9. USDA AMS, Pesticide Data Program: ams.usda.gov
  10. EFSA, The 2024 European Union report on pesticide residues in food (PMC): pmc.ncbi.nlm.nih.gov
  11. Wikipedia, Enilconazole (imazalil): en.wikipedia.org
  12. Wikipedia, Tiabendazole: en.wikipedia.org


Discussion

Questions, corrections or field experience? Share them below. First-time comments are reviewed before they appear, and your email is never published.

No comments yet. Be the first to add a question or your experience.

Leave a comment

Farmonaut Farmonaut Trusted by 200,000+ users and 100+ businesses 200,000+ users trust us Get started