Hydroponics ยท Nutrient guide
Best Hydroponic Nutrient Solution: Organic vs Mineral
A complete solution at the right strength and pH beats any single brand. Example lettuce recipe in ppm, EC and pH targets for seven crops, what trials show about organic nutrients, and a calculator for nutrient cost per plant.

Key takeaways
- The University of Kentucky’s example lettuce recipe supplies 150 ppm N, 39 ppm P, 162 ppm K, 139 ppm Ca and 47 ppm Mg at an EC of about 1.5 mS/cm.
- Oklahoma State University Extension lists EC targets from 1.0-1.6 mS/cm for basil to 2.0-4.0 mS/cm for tomato.
- In a 2024 lettuce trial, the best organic solutions gave heads about 9-10% lighter than the mineral control (158-160 g vs 175 g), with far lower leaf nitrate.
- In the US, hydroponic produce can be certified organic by a USDA-accredited certifier; a 2022 Ninth Circuit ruling upheld this.
- Check the label, your certifier and local rules before using any organic input.
In this article
- What makes the best hydroponic nutrient solution?
- An example lettuce recipe in parts per million
- Mineral vs organic: what the trials show
- 7 organic hydroponic nutrient types compared
- Target EC and pH by crop
- Best hydroponic nutrients for lettuce
- Best hydroponic nutrients for tomatoes and other vegetables
- Are organic hydroponic nutrients allowed for certified organic produce?
- How to mix and manage a hydroponic nutrient solution
- How much do hydroponic nutrients cost per plant?
- Which system suits which nutrient?
- Common nutrient problems and fixes
- Monitoring beyond the reservoir
- How we checked the numbers
The best hydroponic nutrient solution is a complete one: it supplies all the nitrogen, phosphorus, potassium, calcium, magnesium and trace elements a crop needs, mixed to the right strength (EC) and acidity (pH) for that crop. For lettuce, the University of Kentucky gives an example recipe with 150 ppm nitrogen at an EC of about 1.5 mS/cm and a pH of 5.5 to 6.0. Mineral salt mixes hit those numbers most easily. Organic solutions can work too, but in trials they have grown smaller plants unless they are managed with care.
This guide compares mineral and organic options, lists seven organic nutrient types with their strengths and limits, shows target EC and pH by crop, and gives a calculator to work out what nutrients cost per plant. If you want the general basics first, read our overview of hydroponic nutrients.
What makes the best hydroponic nutrient solution?
In hydroponics, plants grow without soil. Every nutrient reaches the roots through water. The USDA National Agricultural Library describes hydroponics as growing plants in a water-based nutrient solution, sometimes with a growing medium such as coconut coir, perlite or vermiculite. There is no soil to buffer mistakes, so the solution has to be complete and balanced from day one.
A good solution meets five tests:
- Complete. It supplies the six macronutrients (N, P, K, Ca, Mg, S) and the trace elements (iron, manganese, zinc, boron, copper, molybdenum).
- Balanced. The ratio between nutrients suits the crop and its growth stage. Leafy greens need more nitrogen; fruiting crops need more potassium once they flower.
- Soluble and stable. It dissolves fully and does not clog pumps, drippers or nutrient film channels.
- Easy to measure. You can track its strength with an EC meter and adjust pH reliably.
- Matched to your market. If you sell certified organic produce, every input must be allowed by your certifier.
An example lettuce recipe in parts per million
The University of Kentucky’s Center for Crop Diversification publishes an example fertigation recipe for hydroponic lettuce with an EC of around 1.5 mS/cm. The chart shows its macronutrient levels. The same recipe lists iron at 1.3 ppm, manganese and boron at 0.38 ppm, and zinc and copper at 0.11 ppm.
Chart
Example hydroponic lettuce recipe: macronutrients
ppm in the mixed solution, EC about 1.5 mS/cm
The guide notes that recipes should be adjusted for the cultivar, growth stage, climate and the fertilizers you can buy. It also recommends keeping water alkalinity around 80 ppm (as calcium carbonate) so the solution stays stable while pH can still be adjusted. Growers can send a sample of mixed solution to a lab to confirm what the crop actually receives.
Mineral vs organic: what the trials show
Mineral (synthetic) nutrients are salts that dissolve straight into plant-available ions. Organic nutrients come from fish, seaweed, plant extracts, manures or compost. Much of their nitrogen is bound in proteins and amino acids. Microbes must break these down into ammonium and then nitrate before most crops can use them. That step is the main challenge in organic hydroponics.
A 2024 study in the Journal of Agriculture and Food Research tested five solutions on lettuce in a zero-runoff greenhouse system in the United Arab Emirates. The mineral control produced the heaviest heads. Fish-based and seaweed-based organic solutions came close; humic-acid products fell further behind.
The same study found more chlorophyll and carotene and much lower leaf nitrate in the organic treatments. Leaf nitrate ranged from 3.2 to 8.7 mg/kg with organic solutions, against 259.8 mg/kg with the mineral solution. So the trade-off is clear: organic nutrients may cost some yield but can change crop quality. Results depend on the product, the dose and how well the system supports microbes, so test on a small batch first.
Strengths of mineral nutrient solutions
- Exact, repeatable ratios that match published recipes.
- Fast uptake and easy EC control.
- Little sludge, odour or clogging.
- Often cheaper per gram of nutrient than organic liquids.
Strengths of organic nutrient solutions
- May qualify for organic production, if your certifier approves each input.
- Use by-products such as fish waste and seaweed.
- Can raise some quality traits, such as pigments, and lower leaf nitrate (2024 trial above).
- Add amino acids and other organic compounds alongside the nutrients.
Limits of organic nutrient solutions
- Nutrients release slowly, and the release depends on microbes and temperature.
- EC readings are less reliable, because much of the nitrogen is not yet in ionic form.
- Solids can coat pipes and roots and lower dissolved oxygen.
- Labels list guaranteed analysis, but the actual nutrient release can vary from batch to batch.
Chart
Lettuce head weight by nutrient solution
Shoot fresh weight per plant (g), greenhouse trial, zero-runoff system
7 organic hydroponic nutrient types compared
The original version of this page ranked seven organic options. Here they are by type, so you can compare any brand you find in a store with the same yardstick. Always check the label, the product’s listing status and local rules before use.
| Type | Main nutrients | Best use | Watch for |
|---|---|---|---|
| 1. Fish hydrolysate and fish emulsion | Nitrogen, some P and K | Leafy greens, growth stage | Odour, foam, solids |
| 2. Seaweed and kelp extracts | Potassium, trace elements | Add-on for all crops | Low N; not a full feed |
| 3. Plant-based amino acid liquids | Nitrogen | Base feed in recirculating systems | Needs active microbes |
| 4. Compost and vermicompost teas | Mixed, variable | Media beds, small trials | Food safety, inconsistent strength |
| 5. Humic and fulvic products | Few nutrients | Root zone conditioner | Lower yields when used as the main feed |
| 6. Bat guano and other manures | P (some guanos), N | Flowering crops in media | Solids, sourcing, food safety |
| 7. Hybrid organic-mineral blends | Complete | Growers who want easier control | May not qualify as organic |
1. Fish hydrolysate and fish emulsion
Fish products are a common organic nitrogen source in hydroponics. Hydrolysate is made by breaking fish down with enzymes at low heat; emulsion is cooked and usually has fewer oils and proteins left. In the 2024 lettuce trial, a fish-based solution (labelled 8-2-2) gave heads of about 160 g, against 175 g with mineral nutrients. Use a filter, add it in small doses and watch for foam. Our guide to fish emulsion covers mixing and storage.
2. Seaweed and kelp extracts
Kelp extracts add potassium and trace elements, plus compounds such as alginic acid. Most are low in nitrogen, so they work as a supplement, not as the whole feed. In the same trial, a seaweed-based product with amino acids (labelled 0.3-2-6) produced heads of about 158 g, close to the fish-based solution.
3. Plant-based amino acid liquids
Liquids made from plant proteins, molasses residues or soy supply nitrogen as amino acids. They tend to be cleaner than fish products. They still need microbes to convert the nitrogen to nitrate. Many growers add a biofilter or let the solution “age” with beneficial bacteria before planting.
4. Compost and vermicompost teas
Teas are brewed by steeping compost or worm castings in aerated water. Strength varies from batch to batch, so they are hard to dose to a target EC. Because they come from manure or compost, they need care for food safety on crops eaten raw. They suit small trials and media beds more than commercial nutrient film systems.
5. Humic and fulvic acid products
Humic products help hold nutrients and may support root growth, but they supply few nutrients on their own. In the 2024 trial, the two humic-based solutions gave the lightest heads, at about 144 g and 140 g. Use them as an addition to a complete feed, not as the feed itself.
6. Bat guano and other manures
Some bat guano sources are rich in phosphorus, others in nitrogen, depending on the bats’ diet and the age of the deposit. Guano and manures are usually used as teas or mixed into media. They suit fruiting crops in containers more than water-only systems.
7. Hybrid organic-mineral blends
Some products combine mineral salts with organic additives such as kelp or amino acids. They are easier to control than fully organic feeds. Check whether your certifier accepts each part before you sell produce as organic.
Target EC and pH by crop
EC (electrical conductivity) tells you how much dissolved salt, and so roughly how much nutrient, is in the solution. Oklahoma State University Extension publishes the target ranges shown in the chart. Leafy crops sit at the low end; tomatoes can take much stronger solutions.
Chart
Target EC range by crop
Electrical conductivity of the nutrient solution, mS/cm
| Crop | EC (mS/cm) | pH |
|---|---|---|
| Basil | 1.0 to 1.6 | 5.5 to 6.0 |
| Cucumber | 1.7 to 2.0 | 5.0 to 5.5 |
| Lettuce | 1.2 to 1.8 | 6.0 to 7.0 |
| Peppers | 0.8 to 1.8 | 5.5 to 6.0 |
| Spinach | 1.8 to 2.3 | 6.0 to 7.0 |
| Strawberry | 1.8 to 2.2 | 6.0 |
| Tomato | 2.0 to 4.0 | 6.0 to 6.5 |
Sources differ on lettuce pH: the Kentucky guide gives 5.5 to 6.0, the Oklahoma table 6.0 to 7.0. Many growers settle between the two, and watch for iron deficiency (pale new leaves) if pH climbs.
Best hydroponic nutrients for lettuce
Lettuce is one of the most widely grown hydroponic crops; a 2023 meta-analysis calls it the most cultivated crop in controlled-environment systems. The University of Florida reports that lettuce in nutrient film systems is usually kept at an EC of 1.2 dS/m (the same as mS/cm) during germination and 1.5 to 1.8 dS/m during production. It also reports its own trial, which found growers could lower the solution to an EC of 1.2 without affecting lettuce growth, which saves fertilizer.
The Kentucky guide suggests starting seedlings on a balanced complete fertilizer at an EC of 1.0 mS/cm and a pH of 5.5 to 6.0. It notes that lettuce is a cool-season crop that bolts with prolonged heat. A meta-analysis of 121 studies on lettuce in controlled environments found an average yield of 3.68 kg per square metre, which gives a rough benchmark for your own system.
For lettuce, a complete mineral mix (a two-part or three-part product, or a single-bag lettuce formula with calcium nitrate) is the simplest choice. If you want organic, a fish or plant-amino base plus kelp is the combination with the best trial results so far.
Best hydroponic nutrients for tomatoes and other vegetables
Fruiting crops such as tomatoes, peppers, cucumbers and strawberries need more potassium and calcium once they flower. Many growers use a “grow” formula during vegetative growth and switch to a “bloom” or fruiting formula later. The Oklahoma table puts tomatoes at an EC of 2.0 to 4.0, the highest of the crops listed, and cucumbers at 1.7 to 2.0.
Calcium is easy to overlook. Blossom-end rot in tomatoes and tipburn in lettuce are linked to calcium not reaching fast-growing tissue. Calcium nitrate is the usual source in mineral systems. In organic systems, calcium often comes from added sources such as calcium carbonate in media, which is one more reason to test.
โถ Ten low-cost agri businesses, including microgreens and hydroponic farming at home. ยท 8:32
Are organic hydroponic nutrients allowed for certified organic produce?
The answer depends on where you sell.
- United States. Hydroponic farms can sell produce as organic if they meet the Organic Foods Production Act and USDA rules and are certified by a USDA-accredited certifier. On 22 September 2022, the Ninth Circuit Court of Appeals upheld a ruling that lets hydroponic growers keep the organic label, as the National Agricultural Law Center reported. A USDA ERS report notes that U.S. retail sales of organic fruit and vegetables reached $21 billion in 2021, which explains why the debate matters to growers.
- Input lists. Many certifiers check products against lists such as those from the Organic Materials Review Institute (OMRI). A product being “organic-based” on the bottle does not mean it is allowed; ask your certifier.
- Other markets. The European Union, the UK, Canada, Australia and New Zealand set their own organic rules, and several of them require crops to be grown in soil. Check with your national certifier before marketing hydroponic produce as organic outside the US.
This is general information, not legal advice. Check the label, local rules and your certifier’s guidance before you buy.
How to mix and manage a hydroponic nutrient solution
- Test your water. Know its starting EC, pH and alkalinity. Hard water already contains calcium and magnesium.
- Fill the reservoir first. Add each part of a multi-part product separately and stir between parts. Never mix concentrates together undiluted, because calcium and sulphate or phosphate can form solids.
- Bring EC to target. Add nutrient until the EC meter reads the target for your crop and stage.
- Adjust pH last. Use pH down (acid) or pH up in small steps, then measure again after a few minutes.
- Check daily. As plants drink water and use nutrients, EC and pH drift. Top up with plain water if EC rises; add nutrient if it falls.
- Change the solution regularly. Ions that plants do not use build up over time. Many small growers change the reservoir every one to three weeks.
- Keep it cool and oxygenated. Warm solutions hold less oxygen and favour root disease. A dissolved oxygen meter helps in water-based systems, according to the Kentucky guide.
Nutrient efficiency matters too. The University of Florida reports a study where only 2.5% of the iron added ended up in lettuce tissue, a reminder that more fertilizer is not always better.
How much do hydroponic nutrients cost per plant?
Bottle prices vary widely, and so do doses. The calculator below turns your own reservoir size, dose and bottle price into a monthly cost and a cost per plant. The default values are examples only; use today’s price from your supplier.
Try the numbers for your own farm below.
Calculator
Nutrient cost per plant per month
Enter your reservoir, dose and bottle price.
- Concentrate used per month: 320 ml
- Nutrient cost per month: $8.46 US$
- Nutrient share of sale value: 9.4 %
Example values only, not a benchmark; use today’s price and the dose on your product label. The result covers nutrient concentrate only, not pH adjusters, water, power or labour.
Which system suits which nutrient?
Your growing system affects which nutrients work. Nutrient film technique (NFT) runs a thin film of solution through channels over bare roots, as Oregon State University Extension explains. It suits leafy greens and herbs, but it is the least forgiving of solids, so clean mineral or well-filtered organic solutions work best. Deep water culture holds roots in an aerated tank and tolerates a little more organic matter. Media beds and containers with coir or perlite give microbes a place to live, which makes them the easiest systems for organic feeds. Aeroponics sprays roots with a mist and needs very clean solution; see our comparison of aeroponic and hydroponic systems.
โถ Small farm business ideas that start from a shelf of microgreens. ยท 6:03
Common nutrient problems and fixes
| Symptom | Likely cause | First check |
|---|---|---|
| Pale new leaves | Iron not available, often high pH | pH; iron in the mix |
| Pale older leaves | Low nitrogen | EC too low; organic N not yet converted |
| Brown leaf tips (tipburn) | Calcium not reaching new leaves | Humidity, airflow, calcium level |
| Brown, slimy roots | Low oxygen, root disease | Solution temperature, aeration, solids |
| Salt crust, leaf edge burn | EC too high | Dilute with water; check dose |
Monitoring beyond the reservoir
Indoor hydroponic systems are measured with meters. Field and greenhouse operations that also grow in soil can add satellite crop monitoring to check plant vigour across larger areas. Farmonaut Satellite + AI Farm Monitoring System gives vegetation maps for fields drawn in its app, which helps growers who run both hydroponic and soil-based production compare crop health over the season.
Related pages on our site: carbon footprinting for agriculture ยท large-scale farm management ยท product traceability for agriculture ยท satellite and weather API developer docs ยท fleet management for agriculture ยท crop plantation and forest advisory
โถ How to read satellite crop data for your fields in the Farmonaut app. ยท 4:01
How we checked the numbers
Nutrient levels come from the University of Kentucky’s hydroponic lettuce guide (updated 2026). EC and pH targets come from Oklahoma State University Extension and the University of Florida. Yield results for organic solutions come from one peer-reviewed greenhouse study (2024); other products and systems may give different results. Legal status comes from the National Agricultural Law Center and USDA. Brands were not tested and none are endorsed.
FAQ
What is the best hydroponic nutrient solution?
A complete solution that supplies all macro and trace nutrients at the right EC and pH for your crop. For lettuce, the University of Kentucky’s example has 150 ppm nitrogen at about 1.5 mS/cm. Mineral mixes are the easiest to control; organic options can work with more care.
What are the best hydroponic nutrients for lettuce?
A complete mix with calcium nitrate, kept at an EC of about 1.2 to 1.8 and a pH near 5.5 to 6.0. For organic growing, fish or plant-amino bases plus kelp gave the best results in a 2024 trial.
Do organic hydroponic nutrients give lower yields?
Often, slightly. In the 2024 lettuce trial, the best organic solutions gave heads about 9-10% lighter than the mineral control, while humic-based products did worse. Organic plants had more pigments and much less leaf nitrate.
Can hydroponic produce be certified organic?
In the United States, yes, if a USDA-accredited certifier approves the operation; a 2022 appeals court ruling upheld this. Rules differ in other countries, so check with your national certifier.
How often should I change hydroponic nutrient solution?
Check EC and pH daily and top up as needed. Many small growers replace the whole solution every one to three weeks, because unused ions build up.
Can I make my own hydroponic nutrients?
Yes. Commercial growers often mix their own from single salts using a recipe like Kentucky’s. Get a water test first and weigh salts accurately; follow the label and safety advice for each product.
Farmonaut crop monitoring
Watch crop health across your fields
Draw your fields once and Farmonaut shows satellite vegetation maps for them through the season, on web, Android or iOS.

Sources
- University of Kentucky Center for Crop Diversification, Hydroponic Lettuce (CCD-CP-63, updated 2026): ccd.uky.edu
- Oklahoma State University Extension, Electrical Conductivity and pH Guide for Hydroponics (HLA-6722): pods.okstate.edu
- University of Florida IFAS Extension, AE610: nutrient management in hydroponic lettuce: edis.ifas.ufl.edu
- Alneyadi et al., organic nutrient solutions for lettuce in a zero-runoff soilless system, Journal of Agriculture and Food Research 15 (2024) 101035: ktisis.cut.ac.cy
- Let-Us Investigate: a meta-analysis of lettuce yields in controlled-environment agriculture (PMC, 2023): pmc.ncbi.nlm.nih.gov
- USDA National Agricultural Library, Hydroponics: nal.usda.gov
- USDA Economic Research Service, Controlled Environment Agriculture and Agrivoltaics (EIB-264): ers.usda.gov
- National Agricultural Law Center, The fight over organic hydroponics: an update (2022): nationalaglawcenter.org
- Organic Materials Review Institute, OMRI Lists: omri.org
- Oregon State University Extension, Hydro hints: nutrient film technique (EM9457): extension.oregonstate.edu
Discussion
Questions, corrections or field experience? Share them below. First-time comments are reviewed before they appear, and your email is never published.
No comments yet. Be the first to add a question or your experience.




Exploration consultancy · South Africa · Gold
Licence holder · Niger · Gold
Licence holder · Nigeria · Gold + lithium
Client · Tanzania · Gold
Client · Somalia · Gold
Client · Oregon, USA · Gold
Client & affiliate partner · Ghana · Gold