Gold processing ยท Cyanidation
Why Cyanide Is Used in Gold Mining: Process and Risks
A dilute sodium cyanide solution of 100 to 500 ppm dissolves gold too fine to see, which is why cyanidation has been the dominant gold extraction method since the 1970s (SME).

Key takeaways
- Leach solutions hold only 100-500 ppm (0.01-0.05%) sodium cyanide (SME).
- Mining uses about 6% of the 1.1 million-plus tons of cyanide made each year (SME).
- Sodium cyanide cost US$1,748-3,295 per tonne by region in June 2026 (IMARC); at typical doses that is roughly 1% of gold value.
- The Cyanide Code requires WAD cyanide under 50 ppm in open tailings water; the EU caps it at 10 ppm.
- Montana, Wisconsin, the Czech Republic and Hungary have banned cyanide mining; thiosulphate runs commercially at Goldstrike, Nevada.
In this article
- Why cyanide is used in gold mining
- How cyanide dissolves gold: the chemistry
- How cyanide is used in gold processing, step by step
- Heap leaching vs carbon-in-leach vs vat leaching
- Sodium cyanide price and cost per ounce
- Environmental and health risks of cyanide in gold mining
- Cyanide limits, laws and bans
- How mines reduce cyanide risk
- Alternatives to cyanide for gold extraction
- What consultants and licence owners should check
- Frequently asked questions
Cyanide is used in gold mining because a weak solution of it dissolves fine gold out of crushed rock cheaply and selectively. A typical leach solution holds only 100 to 500 ppm (0.01% to 0.05%) sodium cyanide, according to the Society for Mining, Metallurgy & Exploration (SME), yet it pulls gold particles too small to see into solution, where activated carbon or zinc dust then catches them. That is why cyanidation has been the dominant gold extraction method since the 1970s, and why most large mines from Nevada to Western Australia still run on it.
This guide explains the chemistry in plain words, the main ways mines use cyanide (heap leaching, carbon-in-leach and carbon-in-pulp, vat leaching), what the reagent costs per tonne, the real risks, the limits regulators set, and the alternatives being tested. It is written for mining consultants, licence owners and investors who need to judge a project’s processing route, not just define a word. A calculator further down estimates sodium cyanide cost per ounce for your own ore.
Why cyanide is used in gold mining
Gold is one of the least reactive metals. It does not dissolve in water, ordinary acids or most salts. Before 1887, the main ways to separate it from rock were gravity (panning, sluicing, shaking tables), amalgamation with mercury, and chlorination. Each worked poorly on fine or low-grade ore. Cyanide changed that because it forms a very stable, water-soluble compound with gold.
Chart
Cyanide concentrations at a gold mine compared
Parts per million (ppm) cyanide
Five practical reasons explain why the industry still relies on it:
- Selectivity. In an alkaline solution, cyanide dissolves gold and silver while leaving most of the rock (quartz, silicates) untouched.
- Low dose. Mines use dilute solutions in the hundreds of parts per million, so a tonne of ore typically needs well under a few kilograms of reagent.
- Fine gold. Microscopic and “invisible” gold that gravity methods lose can be dissolved once the ore is crushed or ground fine enough for solution to reach it.
- Scale. The same chemistry works on a crushed-ore heap of millions of tonnes or in a stirred tank, which lets mines treat ore grading below 1 gram per tonne (g/t, grams of gold in each tonne of rock).
- Cost. SME notes that after many years of research no other reagent comes close to cyanide’s combined economic and environmental performance for precious metals.
Mining is a small user of the chemical overall. SME reports that over 1.1 million tons of cyanide are used each year, mostly for plastics, adhesives, pharmaceuticals and other industry, and that mining takes about 6% of the total.
How cyanide dissolves gold: the chemistry
The reaction is known as the Elsner equation. As summarised in the gold cyanidation reference, four gold atoms react with eight sodium cyanide molecules, oxygen and water to form sodium dicyanoaurate and sodium hydroxide:
4 Au + 8 NaCN + O2 + 2 H2O โ 4 Na[Au(CN)2] + 4 NaOH
Three points matter in practice. First, each gold atom needs two cyanide ions, so reagent demand from gold itself is tiny; most cyanide is lost to other minerals (copper, iron sulphides) and to degradation. Second, oxygen is essential, which is why tanks are aerated and heaps are irrigated in thin streams. Third, the solution must be kept alkaline, usually with lime, at a pH around 10 to 11. In acid conditions cyanide turns into hydrogen cyanide gas, which is the main safety hazard at any plant.
Carl Wilhelm Scheele observed that gold dissolves in cyanide solutions in 1783. John Stewart MacArthur, working with Robert and William Forrest in Glasgow, turned that into an industrial process in 1887 (the MacArthurโForrest process), and it rescued the deep, pyritic ores of South Africa’s Witwatersrand, where mercury recovery had fallen short.
How cyanide is used in gold processing, step by step
Every cyanide circuit follows the same five stages, whatever the equipment:
- Size reduction. Ore is crushed (for heaps) or crushed and ground to a fine powder (for tanks). Finer particles expose more gold to the solution. Our guide to rock crushing in mining covers the equipment.
- pH control. Lime or caustic soda raises the pH so cyanide stays in solution as the cyanide ion rather than escaping as gas.
- Leaching. Dilute sodium cyanide solution contacts the ore, in a heap, a vat or a series of agitated tanks, until most of the gold has dissolved. Tanks take about a day; heaps take weeks to months.
- Gold recovery. The gold-bearing (“pregnant”) solution passes over activated carbon, which adsorbs the gold complex, or is treated with zinc dust (the Merrill-Crowe process) to precipitate the gold. Gold is stripped from the carbon, recovered by electrowinning, and smelted into dorรฉ bars.
- Cyanide recycling and destruction. Barren solution is recycled to the leach. Whatever leaves the circuit to the tailings facility is first treated to destroy or reduce the remaining cyanide.
For a deeper walk through each stage, see our explainer on the gold extraction by cyanide process.
โถ Follows gold from rock to ring: crushing, dissolving, catching on carbon and refining. ยท 5:27
Heap leaching vs carbon-in-leach vs vat leaching
The US EPA technical report on gold beneficiation describes two basic types of cyanidation: tank leaching and heap leaching. Tank leaching splits further into carbon-in-pulp (CIP), where leaching and carbon adsorption happen in separate sets of tanks, and carbon-in-leach (CIL), where carbon sits in the leach tanks themselves. Vat leaching is an older, smaller-scale method that floods crushed ore in a lined vat.
| Method | Best for | Pros | Cons |
|---|---|---|---|
| Heap leaching | Large tonnages of low-grade oxide ore, dry climates (for example Nevada) | Low capital cost; no fine grinding; simple operation | Slower; lower recovery on coarse or sulphide ore; large lined pads and ponds to manage |
| Carbon-in-leach (CIL) | Higher-grade or finer-grained ore, ores with natural carbon that “robs” gold | Fast; high recovery; carbon competes with preg-robbing minerals | Grinding mill and tank farm raise capital and power costs |
| Carbon-in-pulp (CIP) | Non-refractory ore without preg-robbing carbon | Proven, high recovery; easier carbon management than CIL | Same grinding cost as CIL; more tanks |
| Vat leaching | Small operations and tailings retreatment | Small footprint; low cost to start | Batch process; limited scale; needs careful solution control |
The choice comes down to ore type and grade. Oxide ore, where weathering has already released the gold, usually suits heap leaching. The EPA report notes that recovery from sulphide ore by cyanidation is generally lower and more costly than from oxide ore, because the solution reacts with other minerals; such ore often needs flotation, roasting or pressure oxidation first. Related reading: cyanide heap leaching explained, how a gold CIP plant works, and a field study of vat leaching gold extraction in Zimbabwe.
What to check in a test-work report
For consultants reviewing a project, bottle-roll and column leach tests are where the processing case is made or lost. Check the grind size used, leach time, sodium cyanide and lime consumption in kg per tonne, gold recovery at each size, and whether copper or arsenic minerals were present. High cyanide-soluble copper is the usual reason reagent use jumps.
Sodium cyanide price and cost per ounce
Sodium cyanide is sold as solid briquettes or as a liquid solution. Prices vary by region and freight. Market tracker IMARC reported these sodium cyanide prices for June 2026 (second quarter):
Chart
Average gold price
US$ per troy ounce, annual average
Chart
Sodium cyanide price by country, June 2026
US$ per tonne
- United States: about US$3,295 per tonne
- Argentina: about US$2,408 per tonne
- Brazil: about US$2,186 per tonne
- Australia: about US$2,092 per tonne
- Indonesia: about US$1,748 per tonne
Those numbers look large, but the reagent is a small share of the value of gold recovered. At 0.5 kg of sodium cyanide per tonne of ore and US$3,000 per tonne of reagent, cyanide costs about US$1.50 per tonne of ore. If that ore carries 1 g/t gold and the plant recovers 85%, each tonne yields about 0.027 troy ounces, so cyanide costs roughly US$55 per ounce before freight, storage and destruction chemicals. With gold at US$4,098 per ounce on 5 November 2026 (Kitco), that is near 1% of the metal value. Consumption and recovery here are example values; your own test work sets them.
The price of gold explains why the reagent bill rarely decides a project. The USGS Mineral Commodity Summaries 2026 put the average gold price at about US$3,300 per ounce in 2025, up from US$1,801 in 2021. Higher prices let mines leach lower-grade ore, which raises total cyanide use even when the dose per tonne stays the same.
Calculator
Sodium cyanide cost per ounce of gold
Enter your leach-test consumption, ore grade, recovery and today’s reagent price.
- Cyanide cost per tonne of ore (US$): 1.5
- Sodium cyanide used per day (t): 5.0
- Gold recovered per day (oz): 273
Example values only. Consumption and recovery come from your own leach tests. Reagent price is an example, use today’s price (IMARC listed US$3,295/t in the US for June 2026). Excludes freight, lime, destruction reagents and handling. 1 troy ounce = 31.1035 g.
Environmental and health risks of cyanide in gold mining
Cyanide is acutely toxic to people, fish and birds at low doses. The risks at a gold mine fall into four groups:
- Hydrogen cyanide gas. If solution pH falls, cyanide forms HCN gas, a hazard to workers in tanks, sumps and confined spaces. Plants use pH alarms, gas monitors and ventilation.
- Tailings dam failure. The worst cyanide accidents came from dams that overtopped or broke, releasing large volumes of contaminated water.
- Wildlife exposure. Birds and animals drinking from open ponds with high cyanide levels can die. This is why benchmarks focus on weak acid dissociable (WAD) cyanide in open water.
- Transport spills. Trucks carry solid or liquid cyanide long distances to remote mines; road accidents are a known risk.
The Baia Mare spill
The best-known case is Baia Mare in Romania. On the night of 30 January 2000, a dam at a tailings-retreatment plant run by Aurul (a joint venture of Australia’s Esmeralda Exploration and the Romanian government) burst. About 100,000 cubic metres of cyanide-contaminated water entered the Someศ River, then the Tisza and the Danube, killing large numbers of fish in Romania, Hungary and Serbia, as records of the spill describe. The pond held 66 to 81 ppm uncomplexed cyanide and 500 to 1,000 ppm total cyanide. Baia Mare led directly to the industry’s voluntary code and to tighter EU rules.
Is cyanide persistent?
Unlike mercury, cyanide breaks down. SME states that cyanide is typically not persistent in the environment and degrades through oxidation and sunlight to products found in nature. That cuts both ways: it does not build up in food chains, but a sudden release can still kill quickly before it degrades. The contrast with mercury, which persists and accumulates, is covered in our article on mercury in gold extraction. For the wider picture of how mines affect land and water, see cyanide in mining and safer gold recovery.
โถ Seven environmental impacts of mining, explained in clay animation. ยท 2:31
Cyanide limits, laws and bans
There is no single global law on cyanide in mining. Instead, three layers apply.
The International Cyanide Management Code
The International Cyanide Management Code is a voluntary programme for gold and silver mines and for the companies that produce and transport cyanide. Signatories commit to its principles and standards of practice, and operations are audited for compliance every three years by independent auditors. The International Cyanide Management Institute accepted its first signatories in November 2005, and the Code reports over 240 signatory companies. SME notes that Code compliance requires WAD cyanide below 50 ppm in open tailings water to protect wildlife, and that many operations reach below 10 ppm.
Government limits
The EU Mining Waste Directive caps WAD cyanide in tailings ponds of mines started after 1 May 2008 at 10 ppm, with older mines phased down to 10 ppm by 2018. In the United States, cyanide facilities are permitted by states (for example Nevada’s water pollution control permits) under federal water and waste law. Many African and Latin American countries now write Code compliance or similar limits into mining licences.
Where cyanide mining is banned
Some jurisdictions have gone further. Montana banned new open-pit mines using heap or vat cyanide leaching by citizens’ initiative, and Wisconsin, the Czech Republic and Hungary have also passed bans. The European Commission rejected an EU-wide ban, saying existing rules were adequate. Licence holders in Montana should read our guide to gold mining permits in Montana before planning a processing route.
How mines reduce cyanide risk
Modern plants combine engineering and chemistry to keep cyanide inside the circuit and destroy what leaves it.
- Cyanide destruction. 911 Metallurgist lists the main methods: the sulphur dioxide and air (INCO) process, hydrogen peroxide, Caro’s acid, alkaline chlorination, biological oxidation and natural degradation in ponds. The SO2/air process uses sodium metabisulphite, lime and a copper catalyst to bring WAD cyanide below the EU’s 10 ppm limit.
- Recovery and recycling. Processes such as SART (sulphidisation, acidification, recycling and thickening) recover cyanide and copper from solution, which cuts both reagent use and toxicity of tailings.
- Containment. Heap pads and ponds use double synthetic liners with leak detection, and tailings facilities are designed to modern dam-safety standards.
- Dosing control. Online analysers adjust cyanide addition to what the ore actually needs, which lowers both cost and residual cyanide.
- Monitoring. Groundwater wells, pond sampling and bird netting or deterrents over open solution ponds. Satellite imagery adds a regular, wide-area view of pond levels, pad footprints and vegetation stress around a site between ground visits.
Alternatives to cyanide for gold extraction
Several reagents can dissolve gold. None has matched cyanide across all ore types at scale, but some have niche or growing uses:
| Reagent | Where it is used | Main limit |
|---|---|---|
| Thiosulphate | Goldstrike in Nevada (operated by Barrick) has run the first commercial thiosulphate leach since 2014, for carbonaceous ore | Higher reagent use; gold does not load on activated carbon, so resins are needed |
| Glycine (often with low cyanide) | Pilot and early commercial testing, especially for copper-gold ore | Slower leach kinetics; limited track record |
| Halides (chloride, bromide, iodide) | Refractory concentrates and refining | Corrosive; costly materials and reagent recovery |
| Thiourea | Laboratory and small trials | High reagent consumption; health concerns |
| Gravity concentration | Coarse native gold, placers, artisanal sites | Misses fine and locked gold |
For small-scale miners, the realistic choice is usually between mercury amalgamation and a properly managed cyanide or gravity circuit. Gravity plus a contained, permitted leach recovers more gold and avoids mercury, which persists in rivers and fish. Any small operator should work with permission from the landholder, a valid mining licence and the local environmental permit, and should never use mercury.
What consultants and licence owners should check
When you review a gold project or a claim for sale, the processing route is as important as the grade. Ask these questions:
- Is the ore oxide, transitional or sulphide, and has the depth of oxidation been drilled?
- What did bottle-roll and column tests show for recovery and cyanide consumption at the proposed crush or grind size?
- Is cyanide leaching allowed in this jurisdiction, and what WAD limits apply to tailings?
- Is there water for a leach operation, and where would a heap pad or tailings facility sit relative to rivers and communities?
- Will the operator sign the Cyanide Code, or is a buyer’s lender likely to require it?
Early-stage screening with satellite data can show alteration and oxidation patterns at the surface, slope and drainage for siting pads and ponds, and the history of past disturbance on a licence, before money is spent on drilling or test work.
โถ How satellites map the rock around gold deposits. ยท 4:25
Frequently asked questions
Why is cyanide used in gold mining?
Because a dilute sodium cyanide solution dissolves fine gold selectively and cheaply, letting mines recover gold from low-grade ore that gravity or mercury methods would lose. Cyanidation has been the dominant method since the 1970s (SME).
What is the use of cyanide in gold processing?
It is the leaching agent. Cyanide converts solid gold into a soluble gold-cyanide complex, which is then recovered on activated carbon or by zinc precipitation and refined into dorรฉ.
How much cyanide is used per tonne of ore?
Solution strength is usually 100 to 500 ppm sodium cyanide (SME). Consumption per tonne depends on the ore, especially its copper and sulphide content, and is measured in leach tests for each project.
Is sodium cyanide or potassium cyanide used for gold?
Sodium cyanide is the most common. Potassium cyanide and calcium cyanide are sometimes used in its place.
How long does cyanide leaching take?
Agitated tank leaching usually takes around a day. Heap leaching of crushed ore runs for weeks to months as solution trickles through the pile.
Is cyanide gold mining dangerous?
Cyanide is acutely toxic, and dam failures such as Baia Mare in 2000 caused major fish kills. With alkaline pH control, lined facilities, cyanide destruction and independent audits under the Cyanide Code, risks are managed at most large mines.
Where is cyanide mining banned?
Montana (for new open-pit heap and vat leach mines) and Wisconsin in the US, plus the Czech Republic and Hungary, have banned it. The EU did not adopt a ban but caps WAD cyanide in tailings at 10 ppm.
What happens to cyanide after gold is recovered?
Most is recycled to the leach. The rest is destroyed by processes such as SO2/air or hydrogen peroxide, and residual cyanide in tailings degrades naturally through oxidation and sunlight.
Can gold be extracted without cyanide?
Yes. Thiosulphate has been used commercially at Goldstrike in Nevada since 2014 (AusIMM), and glycine, halide and gravity methods are used or tested. None yet replaces cyanide across all ore types.
How big is the sodium cyanide market for mining?
Mining uses about 6% of world cyanide output, according to SME. Regional sodium cyanide prices in June 2026 ranged from about US$1,748 per tonne in Indonesia to US$3,295 in the United States (IMARC).
More from Farmonaut: carbon footprinting, crop loan and insurance, farmonaut satellite weather api developer docs, fleet management, product traceability.
This page is for information only and is not engineering, legal or investment advice. Any gold processing needs landholder permission, a valid licence and environmental permits; never use mercury.
Farmonaut mining
Map your mining site from space
Consultants can screen a licence for surface alteration, drainage and past disturbance from satellite data before committing to drilling or leach test work.
Mining Pro sample view, synthetic data
Sources
- SME, The Safe and Effective Use of Cyanide in the Mining Industry: smenet.org
- Wikipedia, Gold cyanidation: en.wikipedia.org
- US EPA, Technical Resource Document: Extraction and Beneficiation of Ores and Minerals, Gold: archive.epa.gov
- IMARC Group, Sodium Cyanide Price Trend (Q2 2026): imarcgroup.com
- Kitco, Live gold price (5 November 2026): kitco.com
- USGS, Mineral Commodity Summaries 2026: Gold: pubs.usgs.gov
- Wikipedia, 2000 Baia Mare cyanide spill: en.wikipedia.org
- International Cyanide Management Institute, The Cyanide Code: cyanidecode.org
- International Cyanide Management Institute, About the Cyanide Code: cyanidecode.org
- 911 Metallurgist, Cyanide destruction methods and processes: 911metallurgist.com
- AusIMM World Gold 2019, Laboratory and field evaluations of a new non-toxic gold leach reagent: ausimm.com
- Oregon DOGAMI, Grassy Mountain response on thiosulfate (Goldstrike CaTS): oregon.gov
Discussion
Questions, corrections or field experience? Share them below. First-time comments are reviewed before they appear, and your email is never published.
No comments yet. Be the first to add a question or your experience.




Client · Oregon, USA · Gold
Exploration consultancy · South Africa · Gold
Licence holder · Niger · Gold
Licence holder · Nigeria · Gold + lithium
Client · Tanzania · Gold
Client · Somalia · Gold
Client & affiliate partner · Ghana · Gold