Harvest machinery ยท Model guide
1688 Case IH Combine: Specs, Years and 5 Related Models
The 1688 Case IH combine is a rotary Axial-Flow machine released in 1993 and 1994, with about 260 hp from its Cummins engine (Koneviesti brochure data). It was replaced by the 2188 in 1995. Below: specs for the 1660, 1688, 6088, 9230, 9240 and 9250, custom harvest rates and an own-or-hire calculator.

Key takeaways
- The 1688 was part of the 16 series update of 1993 and 1994, next to the 1644 and 1666; the 21 series replaced it in 1995.
- Koneviesti lists the 1660 at 180 hp (IH engine, 1985-89) or 190 hp (Cummins, 1989-94) with a 6,340-liter tank.
- The 6088 (2008-11) had 309 hp ISO; the 9250 (2019-24) had 557 hp ISO and a 14,400-liter tank.
- US combine sales fell from 7,349 units in 2023 to 3,579 in 2025 (preliminary), per AEM data cited by farmdoc daily.
- In the 2026 Texas A&M survey, the per-acre part of combination rates for combining and hauling corn averaged US$34.73, before hauling and overage charges.
In this article
- 1688 Case IH combine at a glance
- What the Axial-Flow design changed
- 1660 Case combine: the older workhorse
- Case IH 1688 combine specs and years
- Case IH 6088: the 88 series
- Case IH 9230, 9240 and 9250: Class 9 machines
- Horsepower from the 1660 to the 9250
- Used combine market and prices
- Custom harvest rates to compare
- Own or hire: the cost per acre
- Setting up an older rotary combine for harvest
- How to choose between these Case IH combines
- Using field data with an older combine
- FAQ
The 1688 Case IH combine is a rotary Axial-Flow machine that Case IH released in 1993 and 1994 as the top model of its upgraded 16 series, next to the 1644 and 1666 (Case IH Axial-Flow history). Koneviesti’s spec archive puts the top engine of that 1993 update at 260 hp, up from 235 hp on the 1680 it replaced. It was followed by the 2188 in 1995.
This guide gives the 1688’s specs and years, compares it with the older 1660 and the later 6088, 9230, 9240 and 9250, and shows what used-combine buyers face on cost. It ends with a calculator that tests whether owning an older combine beats hiring a custom operator on your acres.
1688 Case IH combine at a glance
The table sums up the six machines this page covers. Power figures come from brochure data collected by Koneviesti and the French guide Terre-net. Ratings differ (DIN, ISO, metric horsepower), so treat them as close, not exact, comparisons.
| Model | Built | Rated power | Grain tank | Best for |
|---|---|---|---|---|
| 1660 | 1985 to 1994 | 180 hp (IH), 190 hp (Cummins) | 6,340 L (about 180 bu) | Small grain farms on a tight budget |
| 1688 | 1993 to 1994 | About 260 hp | Larger than the 1680 | Mid-size corn and soybean farms |
| 6088 | 2008 to 2011 | 309 hp ISO (335 boost) | 10,570 L (about 300 bu) | Growing farms wanting newer parts |
| 9230 | From 2012 | 571 metric hp | Class 9 size | Large row-crop and grain farms |
| 9240 | Until 2019 | Class 9 | Class 9 size | Large farms and custom crews |
| 9250 | 2019 to 2024 | 557 hp ISO (634 boost) | 14,400 L (about 410 bu) | Big acreage and custom harvest |
Bushel figures are our conversions from liters (one US bushel is about 35.2 liters). Wikipedia describes the 240 and 250 series as improved versions of the 230 series; Koneviesti dates the move to the 250 models to the 2019 model year.
What the Axial-Flow design changed
International Harvester launched the first rotary Axial-Flow combines, the 1440 and 1460, in 1977. A single long rotor did most of the threshing and separating, in place of the drum and straw walkers used before. The design gave more capacity in the same size of machine.
Case IH says the first Axial-Flow had 170 horsepower and a 180-bushel tank, while its AF11 now has more than 775 horsepower and a 567-bushel tank (Case IH, Axial-Flow legacy, May 2025). The same article dates the first yield monitors to 1994 and auto guidance to 2006.
The single-rotor idea in plain terms
Crop enters the front of a rotor that runs along the length of the machine. Grain is rubbed out of the heads and falls through concaves and grates onto the cleaning shoe. Straw moves to the back and out. Fewer moving parts than a walker machine is one reason old rotary combines still sell at auction.
โถ Six plain steps to start precision farming without buying new machines. ยท 4:18
1660 Case combine: the older workhorse
The 1660 came in the second Axial-Flow generation, launched in the fall of 1985. Koneviesti’s data shows two versions. From 1985 to 1989 it ran an IH DT-466 engine at 180 hp. From 1989 to 1994 it used a Cummins 6T-830 at 190 hp. Both had a 6,340-liter grain tank, a 350-liter fuel tank and a standard 430 cm (about 14 ft) cutting width.
In 1990 Case IH lengthened the cleaning shoe sieve and switched to CDC engines, built by a company Case IH owned jointly with Cummins. Buyers often tell the early and late units apart by the big model decal under the grain bin on early machines.
- Best for: small wheat, barley or soybean farms that harvest a few hundred acres.
- Watch for: rotor wear, concave condition, feeder chain and hours on the engine.
- Parts: many wear parts are shared across the 16 series, which helps owners of older units.
Case IH 1688 combine specs and years
The 1688 Case IH combine belongs to the 16-4/6/8 upgrade released in 1993 and 1994. Case IH aimed it at more processing capacity than the 1680. Koneviesti lists the 1680 at 235 hp with a Cummins 6TA-830 and a 7,280-liter tank. The 1993 update raised the top engine to 260 hp even with a lower engine speed.
By that point, about 60,000 Axial-Flow combines had been made, according to the same archive. In 1995 Tenneco spun off Case and the 21 series (2144, 2166 and 2188) replaced the 16 series. So a 1688 on the market today is around 32 to 33 years old.
What a 1688 suits now
- Best for: mid-size corn, soybean and small grain farms that want a simple machine they can fix in the shop.
- Header match: it ran grain platforms and corn heads of its era; check that the feeder face fits any newer head before you buy.
- Technology: it was built around the time Case IH launched its first yield monitors in 1994, so most units need an aftermarket kit for mapping.
Checks before buying a used 1688
- Ask for the engine and separator hours and any rebuild receipts.
- Look at the rotor bars, concaves and grates for wear and cracks.
- Run the machine and listen to the rotor drive and feeder house.
- Check the unloading auger, the cleaning shoe and the chopper.
- Inspect wiring and hydraulic hoses for cracks and leaks.
- Compare the price with recent auction results for the same model.
Upkeep matters more on a 30-year-old machine. Our guide to fleet management covers tracking hours and service work across several machines.
Case IH 6088: the 88 series
The 88 series (5088, 6088 and 7088) took over from the 2377 and 2388 for the 2008 model year and sold until 2011. Koneviesti lists the 6088 at 309 hp ISO, 335 hp with boost, from a Cummins engine. It had a 950-liter fuel tank and a 10,570-liter grain tank. The series had 5.48 mยฒ of separation area and was among the first combines with plastic and fiberglass body panels.
- Best for: farms moving up from a 1600 or 2100 series machine that want more capacity without a Class 9 price.
- Watch for: belt and chain drives, which the 88 series still used, and the condition of the panels.
Case IH 9230, 9240 and 9250: Class 9 machines
The 9230 arrived in 2012 with a Tier 4 interim engine and the larger 6.1 mยฒ cleaning area. Terre-net’s 2012 spec sheet lists a 13-liter six-cylinder engine at 571 metric horsepower, a 76.2 cm rotor and a 6.5 mยฒ sieve area. Its threshing and cleaning were mostly hydraulic-driven.
The 9240 was an improved 230 series machine. The 9250 replaced it for the 2019 model year. Koneviesti lists the 9250 with an FPT Cursor 16 engine at 557 hp ISO (634 hp with boost), a 14,400-liter tank and an optional 159-liter-per-second unloading rate. AFS Harvest Command automation, which set fan speed, sieves, rotor speed and ground speed, was an option on the 250 series.
- Best for: large farms and custom harvesters covering thousands of acres a season.
- Watch for: engine hours, emission system service history, and software updates from the dealer.
โถ A walk-through of the Farmonaut web app for monitoring crops by satellite. ยท 8:43
Horsepower from the 1660 to the 9250
Rated power more than tripled across these models. The chart shows the figures each spec source gives.
Chart
Rated engine power of six Case IH combines
hp; DIN rating for 1660/1680/1688 era, ISO for 6088 and 9250, metric hp for 9230
Used combine market and prices
New combine sales in the US have dropped. Farmdoc daily, citing the Association of Equipment Manufacturers, reports US combine sales fell from a peak of 7,349 units in 2023 to 5,556 in 2024 and 3,579 in 2025 (preliminary) (farmdoc daily, February 2026).
Chart
US combine retail sales
units per year; 2025 preliminary
Used values held up better. The same article cites Sandhills Global data for December 2025: used combine inventory was down 9.5% on a year earlier, asking prices were down 0.37%, and auction values were up 7.47%. Asking prices are what dealers list; auction values are what machines sold for.
For a 1688 or 1660, prices depend on hours, condition and the head that comes with it. Compare several recent auction results for the same model and region before you bid.
Custom harvest rates to compare
Many small farms hire a custom operator instead of owning a combine. Two public surveys give a sense of the rates.
The 2026 Texas Agricultural Custom Rates survey from Texas A&M AgriLife Extension (February 2026) reports US$34.73 per acre on average (range US$25 to US$50) as the per-acre part of combination rates for combining and hauling corn; hauling and overage charges come on top. Flat rates for combining and hauling averaged US$0.61 per bushel for corn and US$0.59 for wheat and other small grains.
In Canada, the Manitoba farm machinery custom and rental guide (2026-27) estimates rotary combine custom rates from C$31 to C$40 per acre, based on new machine prices and 250 hours a year. Larger classes cover more acres per hour, so their per-acre rate is lower.
Chart
Texas flat rates for combining and hauling
US$ per bushel, state minimum and maximum reported
Own or hire: the cost per acre
An older combine costs less to buy, but repairs, fuel and labor still add up. Mississippi State University Extension splits machinery costs into ownership (depreciation, interest, taxes, insurance and housing) and operating costs (repairs, fuel, lubrication and labor) (Mississippi State Extension, farm machinery cost calculations). It works out depreciation as purchase cost minus salvage value, divided by years of use.
Chart
Manitoba custom rates for rotary combines
C$ per acre by combine class, 2026-27 guide, 250 hours a year
Farmdoc daily also found that machinery costs per acre rose sharply in recent years and urged farmers to rethink purchase decisions (farmdoc daily, October 2025). The calculator below uses the Mississippi State method with your own numbers. This is a budgeting aid, not financial advice; talk to your lender or accountant before a big purchase.
Setting up an older rotary combine for harvest
A well-adjusted 30-year-old machine can still harvest cleanly. The basics are the same on a 1660, a 1688 or a 9250, even if the newer machines set some of them for you.
- Rotor speed: run it fast enough to thresh fully, but slow it for crops that crack easily, such as soybeans and edible beans.
- Concave clearance: open it for large-kernel crops like corn and close it for small grains. Change one setting at a time.
- Fan and sieves: set the fan so chaff floats off without blowing grain over the back. Adjust the sieves after the fan.
- Ground speed: keep the feed rate even. Overloading the rotor raises losses on any model.
- Loss checks: stop, back up and count kernels on the ground behind the machine and in front of the header. Compare the two to see whether losses come from the header or the separator.
Check the operator’s manual for the starting settings for each crop, and keep a notebook of what worked in each field. Owners of older machines often build their own settings sheet over the years.
Where these machines were built
Axial-Flow combines were made in East Moline, Illinois, until production moved to Grand Island, Nebraska, starting with the 2005 model year. The 1660 and 1688 came from East Moline; the 6088 and the Class 9 machines came from Grand Island. Headers for some European markets came from a New Holland plant in Belgium, Koneviesti notes for the 88 series.
How to choose between these Case IH combines
- Count your acres. A few hundred acres of small grain fit a 1660 or 1688. Thousands of acres of corn point to a Class 9 machine or a custom operator.
- Match your crops. Rotor and concave options differ for corn, soybeans, small grains and specialty crops.
- Check parts and dealer support. Older machines need a dealer or salvage yard that still stocks parts.
- Plan for data. Newer models carry yield monitors and guidance. Older ones need add-on kits.
- Run the numbers. Use the calculator and local custom rates before you decide.
Try the numbers for your own farm below.
Calculator
Is owning a used combine cheaper than hiring?
Enter your own purchase price, costs, acres and local custom rate.
- Yearly cost to own (US$): $20,700
- Yearly cost to hire (US$): $21,000
- Saving from owning, per year (negative = hiring is cheaper): $300
Example values only, not a benchmark or a forecast; every number is your input. Ownership cost uses the Mississippi State University Extension method: (price minus resale value) divided by years, plus interest on the average value. Taxes, insurance and housing are left out; add them to yearly running costs.
Using field data with an older combine
A combine without a yield monitor still benefits from field records. Satellite crop maps show which parts of a field grew well during the season, which helps you plan the harvest order and spot weak areas. The Farmonaut Satellite + AI Farm Monitoring System gives vegetation maps for fields you draw, on web, Android and iOS, through the Farmonaut app.
Canola growers also time harvest by crop stage; the Canola Council of Canada harvest management guide covers swathing and straight-cutting timing and how to set a combine to cut losses.
Related pages on our site: satellite crop maps web app, crop data API, satellite API access, weather and satellite API documentation, carbon footprint tracking, crop loan and insurance data, supply chain traceability, product traceability.
โถ How satellite NDVI maps show crop stress across a large farm before it is visible. ยท 4:09
FAQ
What years was the Case IH 1688 combine made?
Case IH released the 1688 in 1993 and 1994 as part of the upgraded 16 series. The 21 series, including the 2188, replaced it in 1995.
How much horsepower does a 1688 have?
Koneviesti’s brochure data gives 260 hp for the top model of the 1993 update, compared with 235 hp for the 1680 it replaced. Check the engine tag on any machine, as ratings changed during production.
What replaced the Case 1660?
The 1666 replaced the 1660 in the 1993 to 1994 update. The 1660 itself was sold from 1985 to 1994 with either an IH or a Cummins engine.
Is the 9250 bigger than the 9230?
Both are Class 9 machines. The 9250 (2019 to 2024) has a 14,400-liter tank and 557 hp ISO, with more automation options. The 9230 (from 2012) had 571 metric hp and came with the 230 series’ Tier 4 interim engine.
Is it cheaper to own an old combine or hire a custom operator?
It depends on your acres, repair costs and local rates. In Texas, the per-acre part of combination rates for combining and hauling corn averaged US$34.73, before hauling and overage charges (Texas A&M, 2026). Enter your own numbers in the calculator above to compare.
Farmonaut crop monitoring
See your own fields from space
Draw your fields once and Farmonaut shows satellite vegetation maps for them through the season, on web, Android or iOS.

Sources
- Wikipedia, Case IH axial-flow combines (accessed November 2026): en.wikipedia.org
- Case IH, The Strength of the Axial-Flow Legacy (May 2025): caseih.com
- Koneviesti Konedata, Case IH Axial-Flow 1640-1680: koneviesti.fi
- Koneviesti Konedata, Case IH Axial-Flow 5088-7088: koneviesti.fi
- Koneviesti Konedata, Case IH Axial-Flow 7250-9250 (2019): koneviesti.fi
- Terre-net, Case IH Axial-Flow 9230 spec sheet (2012): terre-net.fr
- farmdoc daily, The U.S. Farm Machinery and Equipment Market (February 2026): farmdocdaily.illinois.edu
- farmdoc daily, Large Increase in Machinery Costs (October 2025): farmdocdaily.illinois.edu
- Texas A&M AgriLife Extension, 2026 Texas Agricultural Custom Rates (February 2026): agecoext.tamu.edu
- Manitoba Agriculture, Farm Machinery Custom and Rental Guide 2026-27: gov.mb.ca
- Mississippi State University Extension, Farm Machinery Cost Calculations: extension.msstate.edu
- Canola Council of Canada, Harvest management: canolacouncil.org
Discussion
Questions, corrections or field experience? Share them below. First-time comments are reviewed before they appear, and your email is never published.
No comments yet. Be the first to add a question or your experience.







Exploration consultancy · South Africa · Gold
Licence holder · Niger · Gold
Licence holder · Nigeria · Gold + lithium
Client · Tanzania · Gold
Client · Somalia · Gold
Client · Oregon, USA · Gold
Client & affiliate partner · Ghana · Gold