Farm machinery ยท Combine specs guide
Case IH 7120 Combine Specs, With 8120, 7088 and 715
The Case IH 7120 is listed at 360 hp with a 315-bushel tank and weighs 35,080 lb without a header (Ritchie Specs). Compare it with the 8120, 7088 and 9120, see which listed figures to confirm, and test owning against hiring.

Key takeaways
- 7120: 360 hp plus a 30 hp boost, 315 bu tank, 277 gal fuel tank (Ritchie Specs).
- 7088: 325 hp, 300 bu, 33,410 lb, a step below the 7120 (Ritchie Specs).
- The 8120 listing repeats the 7120’s power and weight and shows 750 bu, so confirm it by serial number.
- An IH 715 combine is an older machine; the 2024 715 QuadTrac is a tractor (Wikipedia).
- Custom corn combining averaged US$38.47 per acre in Wisconsin’s 2025 survey, or US$51.08 with grain cart and local hauling. Illinois estimated US$43.40 per acre for a new combine at 3,600 acres in 2025 (farmdoc daily).
In this article
- Case IH 7120 combine specs compared with the 8120 and 7088
- What the 7120 is suited to
- Case IH 8120 and 7088: what to expect
- The 715: an older name to check twice
- Checks before you buy a used combine
- What a combine costs per acre
- Own or hire: test your numbers
- Case IH 7120 features that affect your data
- Residue and soil care at harvest
- FAQ
Case IH 7120 combine specs, as listed by Ritchie Specs: 360 hp with a 30 hp power boost, a 315-bushel grain tank, a 277-gallon fuel tank and an operating weight of 35,080 lb without a header. The 7088 is a step smaller at 325 hp and 300 bushels. Our table below sets these beside the 8120, the 9120 and newer models, and flags the figures you should confirm before you buy.
These models are no longer new, so anyone looking up these numbers is likely weighing a used machine. So this guide also covers what to check on one, what a combine costs to run per acre, and when hiring a custom operator beats owning. The calculator lets you test that with your own figures.
Case IH 7120 combine specs compared with the 8120 and 7088
The table uses one reference for the older machines. Figures are listed specifications from a used-equipment reference, not test results or Case IH documents, and a given machine may differ by year, market and options. Some other fields on these listings are plainly wrong, such as a 9 cu in engine displacement, so treat every figure here as a starting point and check the manual.
| Model | Listed power | Power boost | Weight, no header | Fuel tank | Grain tank |
|---|---|---|---|---|---|
| 7088 | 325 hp | 25 hp | 33,410 lb | 250 gal | 300 bu |
| 7120 | 360 hp | 30 hp | 35,080 lb | 277 gal | 315 bu |
| 8120 | 360 hp (confirm) | 30 hp (confirm) | 35,080 lb (confirm) | 277 gal | 750 bu (confirm) |
| 9120 | 420 hp | 43 hp | 35,960 lb | 277 gal | 350 bu |
These come from the Ritchie Specs pages for the 7088, the 7120 listing, the 8120 listing and the 9120 listing. Treat the 8120 row with care. Its power and weight match the 7120 exactly, and its 750-bushel tank is more than double any other figure in the table. That looks like a data-entry problem, so get the true numbers from the machine’s operator’s manual or a Case IH dealer, using the serial number.
How the older models compare with newer ones
The newer machines carry more power, and the largest carry bigger tanks. Ritchie Specs shows 380 hp and a 315-bushel tank on the 7230 listing, and 450 hp and 350 bushels on the 8230 listing. Case IH’s own US site shows 402 hp, or 468 hp at maximum output, on the Axial-Flow 7260 page, with a 315-bushel tank as standard and 410 bushels as an option. The Axial-Flow 8260 page shows 480 hp and a 410-bushel tank. The 9260 page shows 550 hp and 410 bushels.
Chart
Listed power by combine model
Horsepower before boost; the 8120 is left out until its listing is confirmed
What the 7120 is suited to
Best for: a corn, soybean or small-grain farm that wants a larger rotary machine without paying for a late model. On listed power it sits between the 7088 and the 9120. Its power is about 11% above the 7088 on the listed figures, while the tank grows by only 15 bushels. So the gain is mainly in how much crop it can push through in hard conditions, not in how long it runs between unloads.
Header size and crop load matter as much as the headline number. Before you buy, check that the machine has the power and feeder setup for the corn head or grain head you already own. A head that is too large for the combine slows the whole harvest.
Case IH 8120 and 7088: what to expect
8120
Best for: buyers who want more capacity than a 7120 and can verify the exact build. Its model number suggests a step above the 7120, so a listing that shows the same power as a 7120 deserves a second look. Ask the seller for a photo of the serial plate, the engine hour meter and the separator hour meter, then check the build with a dealer.
7088
Best for: smaller acreage where the lower purchase price matters more than top capacity. At 325 hp and 300 bushels, it gives up 35 hp and 15 bushels against the 7120. On a farm with an easy crop and a grain cart close by, that gap may not change your day much. In a heavy crop with a short weather window, it may.
The 715: an older name to check twice
The 715 is the odd one out in this group. A listing for an “IH 715 combine” refers to an older International Harvester-badged machine, not a current Case IH model. It should not be read as a sibling of the 7120. The old comparison figures that circulate online for it carry no source, so we do not repeat them. Use the manual for that exact machine.
The number also causes confusion in a search. Wikipedia’s Case IH history lists a 715 QuadTrac from 2024. That is a tractor, not a combine. The same history dates IH’s first Axial-Flow rotary combine to 1977 and the creation of Case IH to 1985, which helps explain why old machines may carry either badge.
Checks before you buy a used combine
Hours and condition usually tell you more about value than a spec sheet. Work through these checks on any 7120, 8120 or 7088 before you agree a price.
- Separate the two hour meters. Engine hours and separator hours tell different stories. A big gap between them can mean long periods of road travel or idling.
- Inspect the wear parts. Look at rotor, concaves, feeder chain, elevators, unload auger and chopper. Budget for what is worn.
- Run it under load. If you can, watch it work in a crop. Check for warning codes, grain damage and any shaking or noise.
- Ask for service records. Dated receipts are worth more than a verbal history.
- Check the electronics. Confirm that the yield monitor, display and guidance receiver work with your current setup and data software.
- Fit your header. Confirm the head you own attaches and runs at the right speeds. For upkeep afterwards, see our guide to farm tool maintenance.
As for price, ask dealers and auction firms for recent sale results on the same model and similar hours. Newer machines show the upper end of the market. At a BigIron auction on 4 September 2024, Farms.com reported a 2022 Case IH 9250 with 449.5 engine hours sold for US$300,250, and a 2020 8250 with 1,119 engine hours sold for US$241,250. These are auction results for much newer machines, so they are not a guide to the value of a 7120. Have any finance or purchase contract reviewed by your own adviser.
What a combine costs per acre
Annual use matters a great deal. Overhead such as depreciation, interest, insurance and housing stays about the same each year, so spreading it over more acres cuts the cost per acre. University of Illinois estimates for 2023 show this clearly. The figures assume a new machine bought and held, so an older machine will have a different overhead. The shape of the curve is still the lesson.
Chart
Cost of combining corn at 3,600 acres
US$ per acre, Illinois estimates based on new machines
Costs have also climbed. The farmdoc daily analysis from October 2025 puts corn combining at US$43.40 per acre for 3,600 acres harvested in 2025, against US$31.10 in 2021. It also says farms harvesting less than 3,000 acres with a combine face a clear cost disadvantage on new machines, and suggests shared ownership as one response.
Chart
Corn combining cost falls as acres rise
US$ per acre, new machine, 2023 estimates, by total acres harvested
Own or hire: test your numbers
Custom rates give you the figure to beat. The University of Wisconsin survey for 2025 reports an average of US$38.47 per acre for combining corn alone (range US$26 to US$55, 34 responses). With combine, grain cart and local hauling, the corn average is US$51.08, but the median is US$44 and only 13 operators responded; the range is US$33 to US$75. The same package averages US$50.27 for soybeans and US$48.18 for wheat. In Texas, the Texas A&M 2026 survey reports a statewide average flat rate of US$0.61 per bushel for combining and hauling corn. These are survey averages, and a local operator may charge more or less.
The calculator compares the two options. Enter your yearly overhead, your running cost per acre and a local custom quote. A custom operator may not reach you at the best moment, so timing risk belongs in your decision too.
Try the numbers for your own farm below.
Calculator
Is owning a combine cheaper than hiring?
Enter your own acres, yearly overhead, running costs and a local custom quote.
- Owning, cost per acre: $55
- Hiring, total per year: $62,400
- Break-even area: 1,312 acres
Example values only, set near break-even; not a benchmark. Every number is your input. Overhead means depreciation, interest, insurance and housing. Running cost means fuel, repairs and labor. Get professional advice before a purchase.
Case IH 7120 features that affect your data
A machine of this age can still produce useful records if its monitor works and has been calibrated. Yield monitors have been used on combines since the 1990s, and USDA’s Economic Research Service reported in 2016 that yield mapping was used on about 40% of US corn and soybean acres, using survey data from 2010 and 2012. Those maps show which parts of a field fall behind. Calibrate the monitor for each crop, and keep the files in a format you can open later.
Harvest maps arrive at the end of the season, so many growers pair them with imagery taken during the season. Farmonaut provides satellite vegetation maps of a field, which can help you decide which areas to check before harvest and plan where to start. It does not replace a yield monitor or a field walk.
โถ Six plain steps to start precision farming, from field maps to satellite monitoring. ยท 4:18
Residue and soil care at harvest
A combine affects next year’s crop. Even residue spread helps planter performance and keeps soil covered. Uneven piles can leave cool, wet strips in spring. On any used machine, inspect the chopper knives and spreaders, and match the spread width to your header. Avoid crossing wet fields with a full grain tank, since a 7120’s weight with a full load and header is far above the 35,080 lb empty figure. Use planned traffic paths and unload on the headland where you can.
Other things to weigh when choosing any combine are your main crops, your acreage, how short your harvest window is and how well an operator knows the controls. A good local dealer and parts supply may matter more than a small power gap.
โถ How satellite maps show crop health across a field without walking every acre. ยท 4:09
FAQ
How much horsepower does a Case IH 7120 have?
Ritchie Specs lists 360 hp, with a 30 hp power boost. Confirm the figure for a specific machine with its manual or a dealer.
How big is the 7120’s grain tank?
The listing shows 315 bushels. Machines may differ by option, so check the build sheet for the machine you are buying.
What are the Case IH 8120 combine specs?
Ritchie Specs lists 360 hp, 35,080 lb and a 277-gallon fuel tank, but its 750-bushel tank figure and the exact match with the 7120 look doubtful. Confirm them by serial number with a dealer.
Is the 7088 smaller than the 7120?
Yes, on listed figures: 325 hp against 360 hp, 300 bushels against 315, and 33,410 lb against 35,080 lb.
Is the IH 715 a modern Case IH combine?
No. A 715 combine is an older International Harvester-badged machine. The 715 QuadTrac launched in 2024 is a tractor.
How many acres justify owning a combine?
There is no single number. Illinois analysis found cost disadvantages below 3,000 acres on new machines. An older combine has lower overhead, so run your own figures in the calculator.
Related pages on our site: fleet management, large-farm administration, carbon footprinting, product traceability, crop loans and insurance, satellite and weather API docs, API access, web app, corn yield by state.
Farmonaut crop monitoring
See your own fields from space
Draw your fields once and Farmonaut shows satellite vegetation maps for them through the season, on web, Android or iOS.

Sources
- Ritchie Specs, Case IH 7120 Combine (read November 2026): ritchiespecs.com
- Ritchie Specs, Case IH 8120 Combine (read November 2026): ritchiespecs.com
- Ritchie Specs, Case IH 7088 Combine (read November 2026): ritchiespecs.com
- Ritchie Specs, Case IH 9120 Combine (read November 2026): ritchiespecs.com
- Ritchie Specs, Case IH 7230 Combine (read November 2026): ritchiespecs.com
- Ritchie Specs, Case IH 8230 Combine (read November 2026): ritchiespecs.com
- Case IH US, Axial-Flow 7260 product page (read October 2026): caseih.com
- Case IH US, Axial-Flow 8260 product page (read October 2026): caseih.com
- Case IH US, Axial-Flow 9260 product page (read October 2026): caseih.com
- University of Illinois farmdoc, Machinery Cost Estimates: Harvest Operations (2023): farmdoc.illinois.edu
- farmdoc daily, Large Increase in Machinery Costs Suggests Need to Reconsider Machinery Purchase Decisions (October 2025): farmdocdaily.illinois.edu
- University of Wisconsin-Madison Extension, Custom Rates for 2025 Wisconsin Farm Operations: farms.extension.wisc.edu
- Texas A&M AgriLife Extension, Texas Custom Rates Survey (2026): agecoext.tamu.edu
- USDA Economic Research Service, Farm Profits and Adoption of Precision Agriculture, ERR-217 (2016): ers.usda.gov
- Farms.com, Case IH combines take spotlight at auction (September 2024): m.farms.com
- Wikipedia, Case IH (read November 2026): en.wikipedia.org
Discussion
Questions, corrections or field experience? Share them below. First-time comments are reviewed before they appear, and your email is never published.
No comments yet. Be the first to add a question or your experience.






Exploration consultancy · South Africa · Gold
Licence holder · Niger · Gold
Licence holder · Nigeria · Gold + lithium
Client · Tanzania · Gold
Client · Somalia · Gold
Client · Oregon, USA · Gold
Client & affiliate partner · Ghana · Gold